When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi all.
I have a Mazda CX5 that is showing TCS OFF and a Sliding Car ICON on the dashboard. The car has NO TCS OFF button.
Please assist with how to turn it OFF?
Most Mazda models
The TCS at times will shut off from some sensor anomalous input, this is normal, and it should automatically turn off the dash light when the sensor condition changes to normal sensor input or the next drive cycle. If not, and after shutting down the engine then I recommend to either go to MAZDA or a service shop and have the problem diagnosed.
Manually turning off only control the driver choice in having it on or off during that drive only. Shutting off the engine returned the TCS to automatically on for next drive.
Last edited by Callisto; May 11, 2025 at 09:12 AM.
I have seen this posted on several forums, but I have no idea if it will work or if it will cause other issues.
Press the start button without turning the engine on, just the ACC mode. While pressing the start button, simultaneously press and hold for at least 5 seconds the panel illumination **** or until the master warning light flashes. Once the light flashes for few seconds, the ECU resets and hopefully it will make your problem go away.