Has anyone installed one of those hoot strut kits on a 2021?
Senior Member
Joined: Oct 2018
Posts: 10,523
Likes: 216
From: Northern California
Breakthrough!
I finally realized the metallic “cone” must be COMPLETELY inserted into the fender hole.
Narrow part of cone pointed down, threaded ball stud pointed up.
The cone/stud must be threaded so the cone is just a turn or two onto the threads.
But not so lose that you risk losing the cone into “no mans land.”
Now you GENTLY lift up on the ball stud, so that the cone “grabs” the underside of the fender hole while you gently tighten, first by hand. Then once set, torquing with 13mm deep well.
I feel the printed instructions could have been better detailed, but got ‘er done! 🤗
I finally realized the metallic “cone” must be COMPLETELY inserted into the fender hole.
Narrow part of cone pointed down, threaded ball stud pointed up.
The cone/stud must be threaded so the cone is just a turn or two onto the threads.
But not so lose that you risk losing the cone into “no mans land.”
Now you GENTLY lift up on the ball stud, so that the cone “grabs” the underside of the fender hole while you gently tighten, first by hand. Then once set, torquing with 13mm deep well.
I feel the printed instructions could have been better detailed, but got ‘er done! 🤗
Thread
Thread Starter
Forum
Replies
Last Post
