Post-Top End overhaul -- won't start
Thread Starter
Joined: Apr 2007
Posts: 2
Likes: 0
Post-Top End overhaul -- won't start
Just replaced the head gasket on my 95 626 (4 cyl/2.0 FS). Having trouble starting the engine.
Timing marks aligned (#1 TDC w/cam sprockets matched) & distributor lined up w/#1.
Block intact - no cracks; heads/cylinders very clean!
Top-end completely overhauled to include valves/springs
New belts
Brand new distributor cap/rotor/wires/plugs/battery -- getting spark on all plugs & plenty of fuel
Car sounds like it wants to start but running out of answers -- thanks for any inputs ... I've done plenty of things wrong during this project so I know that I'm missing something!
Timing marks aligned (#1 TDC w/cam sprockets matched) & distributor lined up w/#1.
Block intact - no cracks; heads/cylinders very clean!
Top-end completely overhauled to include valves/springs
New belts
Brand new distributor cap/rotor/wires/plugs/battery -- getting spark on all plugs & plenty of fuel
Car sounds like it wants to start but running out of answers -- thanks for any inputs ... I've done plenty of things wrong during this project so I know that I'm missing something!
Thread
Thread Starter
Forum
Replies
Last Post
Frizzanko
Mazda BT 50 & Pickup Trucks
2
Mar 5, 2009 12:24 AM
