well i got this 626 and it would start up just fine, one day i took it to emissions and it passed with no problem and the next morning it just would not want to start and it did not start till later that day like in the afternoon it started and it was fine again, the next morning was the same thing it would not start in the morning but in the afternoon it didAfter that day which was about a week ago the car just has not wanted to start no matter what, i changed the air flow meter and still did not start also changed the coil over and still doesnt start I mean the car was fine and i really need to get it working since its my Daily Driver Any help i would really appreciate thanks....

 

It would help to know why it isn't starting.

There is three essential items:
Spark
Fuel
Compression

It needs to be narrowed down so we can better help.

 

well i know for sure it is no spark and im not getting a spark not even getting a spark coming out of the coil so i really dont know where to go next...

 

It sounds like a possible igniter problem.

Here is a couple links with similar problem....

No Start 1

No Start 2

 

but the thing is that i replaced two coil overs already and im not getting a spark coming from the coil over so that way i really wont get a spark going into thje distributer...

 

I don't know what you mean by "coil overs", unless you mean ignition coil. The igniter is what controls the coil. If the igniter is bad you will have no spark. This was explained in the links before how it works.