2000 Protege ABS Error codes: 22 & 29?
Former Sponsor
Joined: Feb 2013
Posts: 51
Likes: 0
Thread Starter
|
Junior Member
Joined: Oct 2011
Posts: 15
Likes: 0
Unable to find ABS Control Module
Thank you Go-Part!
Says 29 = Hydraulic Unit Right Front - Left Rear Brakeline
Says 22 = Circuit for the Hydralic unit / circuit for right front solenoid
Was told by a mechanic to replace ABS Control Module but having trouble finding one. Unfortunately not offered on the Go-Part site either.
Anyone know where I can get a part such as this for a 2000 Protege?
Says 29 = Hydraulic Unit Right Front - Left Rear Brakeline
Says 22 = Circuit for the Hydralic unit / circuit for right front solenoid
Was told by a mechanic to replace ABS Control Module but having trouble finding one. Unfortunately not offered on the Go-Part site either.
Anyone know where I can get a part such as this for a 2000 Protege?
Thread Starter
|
Junior Member
Joined: Oct 2011
Posts: 15
Likes: 0
ABS Control Module
Found an ABS Control Module for my vehicle at:
Genuine Mazda Parts at Wholesale - OEM Mazda Replacement Parts
Just ordered it.
Genuine Mazda Parts at Wholesale - OEM Mazda Replacement Parts
Just ordered it.
Thread Starter
|
Junior Member
Joined: Oct 2011
Posts: 15
Likes: 0
Obd-i?
Hey tanprotege,
Does that mean that the descriptions I looked up for codes 22 & 29 do not represent correctly my ABS error codes of 22 & 29? If so, any idea where I can find an explanation of these codes?
I'm hoping the ABS Control Module I have ordered will correct it, regardless. I went with the ABS Control Module because a brake shop did a $75 diagnostic that concluded with this recommendation. They gave the car back to me saying Mazda no longer makes the part.
Does that mean that the descriptions I looked up for codes 22 & 29 do not represent correctly my ABS error codes of 22 & 29? If so, any idea where I can find an explanation of these codes?
I'm hoping the ABS Control Module I have ordered will correct it, regardless. I went with the ABS Control Module because a brake shop did a $75 diagnostic that concluded with this recommendation. They gave the car back to me saying Mazda no longer makes the part.
Senior Member
Joined: Jun 2011
Posts: 2,389
Likes: 0
From: Midwest
No, this only means that I am surprised 
. AFAIK 2-digit codes are OBD-I and you read them from the blinking CEL light. OBD-I was replaced by OBD-II in the early 90s. But it is possible that there are a few systems using the old codes.
I don't know and I would like to know.
. AFAIK 2-digit codes are OBD-I and you read them from the blinking CEL light. OBD-I was replaced by OBD-II in the early 90s. But it is possible that there are a few systems using the old codes.I don't know and I would like to know.
Thread Starter
|
Junior Member
Joined: Oct 2011
Posts: 15
Likes: 0
Problem solved.
Part above wrong but they confirmed an ABS Module (with pump attached) from a Protege with production date Sept-07-2000 to 2003, would work on my 2000.
Installed unit from a 2002 (bought on eBay). ABS light out & more importantly in dash Brake Light out. Just dropped for State re-inspection.
YEAH!!!
Part above wrong but they confirmed an ABS Module (with pump attached) from a Protege with production date Sept-07-2000 to 2003, would work on my 2000.
Installed unit from a 2002 (bought on eBay). ABS light out & more importantly in dash Brake Light out. Just dropped for State re-inspection.
YEAH!!!
Thread
Thread Starter
Forum
Replies
Last Post
Unicornasaurus
Mazda Protege
14
Jan 1, 2013 08:04 PM
