RX8 WHEELS ON MAZDA3
Super Moderator
Joined: Mar 2007
Posts: 8,666
Likes: 0
From: Manor, TX (Outside of Austin)
RE: RX8 WHEELS ON MAZDA3
ORIGINAL: djdaleman
they are aftermarket steel rims. the tires just are wide enough to not clear the fender flair so there is about 2" of travel before the tire hits. I didn"t know if there is a suspension adjustment or something that I can do to prevent the wheel from rubbing.
the winter tires that I put on are 225/50/17 my stock tires where 215/45/18.
they are aftermarket steel rims. the tires just are wide enough to not clear the fender flair so there is about 2" of travel before the tire hits. I didn"t know if there is a suspension adjustment or something that I can do to prevent the wheel from rubbing.
the winter tires that I put on are 225/50/17 my stock tires where 215/45/18.
Since that"s not liable to be a big issue, are you sure the offset of these new wheels is at least close to OE (+60mm?) If the new wheels are pushing the rims out too far, that is more likely where your rubbing is coming from.
Keep in mind that your speedo is probably reading about 1mph too low also. (65mph = 66mph actual.)
Super Moderator
Joined: Mar 2007
Posts: 8,666
Likes: 0
From: Manor, TX (Outside of Austin)
RE: RX8 WHEELS ON MAZDA3
ORIGINAL: vlstellato
What does that mean for thelazy! I had trouble last night trying to get pic to post. Was it really that hard for you to click on the link!
What does that mean for thelazy! I had trouble last night trying to get pic to post. Was it really that hard for you to click on the link!
Thread
Thread Starter
Forum
Replies
Last Post
