debadging the mazda
#41
RE: debadging the mazda
ORIGINAL: Mazda0to6ty
I took my bages off with a heat gun then used a high speed buffer on the remaining gunk,and then applied the "Atenza" Badges I ordered online just for a different look.
I tried to take the Mazda emblem off the trunk,but it left two holes so I put it back on till I can get the holes filled properly.
I took my bages off with a heat gun then used a high speed buffer on the remaining gunk,and then applied the "Atenza" Badges I ordered online just for a different look.
I tried to take the Mazda emblem off the trunk,but it left two holes so I put it back on till I can get the holes filled properly.
When you took your badges off, and put the Atenza ones on, did you screw up like I did and replace the Mazda6 and put the Atenza in it's place?
#42
RE: debadging the mazda
I decided to finally do my debadging today... but i took a little bit of a different method than others. I figured it's almost 95 degrees outside so i let my car sit for an hour outside to heat up the glue under the door guards and badges, then i flossed them off real quick! Then I used some Goo Gone and a little elbow grease... my ride is looking clean, but needs to take a bath before the picture shoot! Shall have pictures up soon enough hopefully (at least by thursday)!
#46
RE: debadging the mazda
cool little rebadge zoomnbyu... but don't you think it is a little out of place now? since it is just one little chrome piece? that's just my opinion and you are allowed to do whatever you want, but i was just letting you know what i thought. I took everything off my ride but the flying m symbols. can't even tell i have a 6cylinder engine until you pop the hood! haha
#47
RE: debadging the mazda
I like the simple look. I always hated the Mazda Mazda6 thing. It's like we're stuttering, or something. Mine is simply a Mazda 6. Now I would like to find a small "s" to put next to the 6. I just haven't found one yet that strikes me. Thanks for the comment, though.
#49
RE: debadging the mazda
i'm not exactly sure... superglue would be way to messy, but Liquid nail is a great product that probably would work, but that would be highly messy as well. i think the best option is to just repurchase the stuff off ebay or a dealer that already has the 3m tape on it. although you could custom cut the 3m tape to put it back on if wanted.