2018 Mazda 3 Inconsistent issue: Code P2299
Hey everyone, I have a 2018 Mazda 3 and I have an inconstant issue I am looking to resolve and figure out:
When driving, occasionally with my foot on the gas the car will start to slow down almost to a complete stop until I take my foot off the gas petal and then put it back on(after this its back to normal). It has happened 3 times over a 5-6 month period and only as the weather was colder.
I took my car to Mazda and they were not able to reproduce the issue but said there was a code in the system, P2299 which is "Brake Pedal Position/Accelerator Pedal Position Incompatible". Mazda recommended a bunch of normal work be done since the car is at 80000 miles: Spark plug replacement, fuel injection, throttle body service, replace belt and tensioner. I had Mazda replace belt and tensioner, fuel injection service, and replace spark plugs. This seemed to fix the problem for a while(for 3 months we were able to drive it in warmer weather with two 8 hour drives and had no issues) but it just occurred again(the weather has been 30 degrees by me recently if that matters for this issue).
Should I have Mazda also do a throttle body service?
I was reading online about P2299, should I replace my APP sensor and or break sensors?
Does anyone have any recommended courses of action to fix this? I read online I can leave it with a dealership for a week to see if they can reproduce it but I also read about people spending a lot of money to fix similar issues and it never working.
When driving, occasionally with my foot on the gas the car will start to slow down almost to a complete stop until I take my foot off the gas petal and then put it back on(after this its back to normal). It has happened 3 times over a 5-6 month period and only as the weather was colder.
I took my car to Mazda and they were not able to reproduce the issue but said there was a code in the system, P2299 which is "Brake Pedal Position/Accelerator Pedal Position Incompatible". Mazda recommended a bunch of normal work be done since the car is at 80000 miles: Spark plug replacement, fuel injection, throttle body service, replace belt and tensioner. I had Mazda replace belt and tensioner, fuel injection service, and replace spark plugs. This seemed to fix the problem for a while(for 3 months we were able to drive it in warmer weather with two 8 hour drives and had no issues) but it just occurred again(the weather has been 30 degrees by me recently if that matters for this issue).
Should I have Mazda also do a throttle body service?
I was reading online about P2299, should I replace my APP sensor and or break sensors?
Does anyone have any recommended courses of action to fix this? I read online I can leave it with a dealership for a week to see if they can reproduce it but I also read about people spending a lot of money to fix similar issues and it never working.
Thread
Thread Starter
Forum
Replies
Last Post




