Mazda Protege This compact model offers an economical solution for the need for a sporty sedan or wagon.

need some help

Old Aug 25, 2007 | 07:01 PM
  #1  
stevechicago's Avatar
Thread Starter
Joined: Aug 2007
Posts: 19
Likes: 0
From:
Default need some help

so i got a 03protege speed and i got a prob. see if i get on it alil bit and then when i let off
the rpms willjust drop andthe car will die... the check eng. light will come on and my bat. light but thats it not the oil light or anything just dies. also someties if i get on it it just wont go my foot will be on thefloor andthe turbo will turn u hear itbut it just wont go... anyone???? i was on someother forums and no one knew...im kinda on my last leg with this car to but i just like it to much to get somethng diff. but let me know
 
Reply
Old Aug 27, 2007 | 08:44 PM
  #2  
hixx's Avatar
Senior Member
Joined: Aug 2007
Posts: 1,324
Likes: 1
Default RE: need some help

Could be alot of things. The most likely possibilities i can think of offhand are restricted exhaust (bang on the bottom of the catilytic converter and see if it rattles like somethings loose inside)/dirty fuel filter/dirty throttlebody/dirty MAF hotwire/dirty injectors ( Techron works best for this/also decarbons the engine)/worn out coil and fuel pump. Just things to check. It's impossible to know without the car in front of me so you have to do the inspections and hopefully will learn a bit along the way.Run it by an Autozone and they can scan the PCM for codes free.
 
Reply
Old Aug 28, 2007 | 12:20 PM
  #3  
stevechicago's Avatar
Thread Starter
Joined: Aug 2007
Posts: 19
Likes: 0
From:
Default RE: need some help

cool thanks man i thought that it might have been the fuel pump but ill get that checked for sure thanks
 
Reply
Old Aug 28, 2007 | 12:36 PM
  #4  
sonicshockwaves's Avatar
Joined: Aug 2007
Posts: 2
Likes: 0
Default RE: need some help

I have been having the same sort of issues with my speed protege, after quickly slowing down the engine will cut off, battery light come on, no check engine light comes on. I've replaced the Mass Airflow sensor, and O2 sensor, neither has helped.I was thinking something like a vaccum leak, bad idle control valve, or dirty egr valve.It's barely running, it will cut off just idling now, and all the places i've taken it to, including a mazdaspeed dealership can't tell me what's wrong.Please help before I lose my mind.
 
Reply
Old Aug 28, 2007 | 03:04 PM
  #5  
hixx's Avatar
Senior Member
Joined: Aug 2007
Posts: 1,324
Likes: 1
Default RE: need some help

They do have a problem with carbon buildup in the EGR valve. Remove the EGR valve,disasemble and clean the carbon out of it.
 
Reply
Old Aug 30, 2007 | 05:05 PM
  #6  
02protege's Avatar
Joined: Aug 2007
Posts: 16
Likes: 0
Default RE: need some help

seafoam the crap out of your car!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
the_gray_mazda6
Mazda6
7
Mar 3, 2016 09:47 PM
Alucard
General Tech
4
Jan 14, 2006 01:34 AM
sweetncrazy_88
General Tech
2
Dec 19, 2005 03:50 AM
Darkshot
Mazda 323,Mazda 626 & Mazda 929
2
Nov 4, 2005 07:05 PM
mymillenias
Mazda Millenia
0
Oct 23, 2005 01:45 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:18 PM.