I have a 1993 Mazda Mx6, I bought the car with one key. It was a copy of the original one. Now the key turns on the car, & opens the glove box, but does not open none of the car doors are trunk. Is it just the doors are key? & what do you think I should do? I thought about geting a new key, I dont know how to go about that. So please help me becouse I plan on doin alot to this car, but I dont wont do keep my doors open all the time.

[IMG]local://upfiles/13033/9EEF5624899D4FB88DAA5A3831D470E0.gif[/IMG]

 

first thing check on the passenger door lock for a key code. You will need to remove the door panel and on the pawl ( the arm on the back of the lock) there should be a 5 digit number . Take this number to a locksmith and they should be able to cut a factory acutate key for the lock

 

Were on the back? I took off the door pannel & cut off the plastic. Now i have a clear view of the back of the lock. I see some numbers mixed with letters. But i dont see a single 5 digit set of numbers.

 

The info I gave you was out of my locksmithing manual , it is usually accurate with the info . The numbers mixed with letters may be a code , if the digits are stamped into the lock this is most likley it. You can pm me the code and I will check it for you.

The manual did state that the code is on the pawl wich is the arm on the back of the lock

 

Ok well the code does just like this.

1882FC
C8E-G150

Thier is a 2 digit number right on the back of the lock but i dont think thats it. Thier is also one on the back of the handle whitch i dont think it is either becouse its on the handle. This one came on a little black box that had wiresconneting tothe lock. I think this is it.