5th and 6th gear gas cutting and stalling
I own a 2018 Mazda CX-3 1.5L diesel vehicle. My car has 85,000 km on it. When driving in 5th and 6th gears, it first cuts the gas and then stalls, lighting up 4-5 warning lights. When you pull over, stop, and start the vehicle, the lights go out and you can continue. However, it happens again after a certain period of time.
Has anyone else experienced this issue and found a solution?
Has anyone else experienced this issue and found a solution?
The warning lights that came on during the malfunction were: lane departure warning light (LDWS), tire pressure warning light, i-stop light, collision warning light, smart city light, and TCS light.
The most recent incident occurred while driving on a long road, and the situation I described several times before repeated itself. Again, while driving at 160 km/h, this time the engine light came on. We drove like that for a day. (I added injector cleaning fluid at the gas station), and then the engine light turned off by itself.
Your information should be reviewed by a service a shop that has a Trained Diagnostic Service Technician with OBDII diagnostic systems and other electronically monitored and controlled systems on your MADA. And from your response this should be done ASAP.
Do not use a shop that only has a basic mechanic. There would be to much guessed diagnosis at your expense.
For a better service shop 1.0 to max 1.5 max hours diagnostics would find and give recommendation to resolve the issues.
Do not use a shop that only has a basic mechanic. There would be to much guessed diagnosis at your expense.
For a better service shop 1.0 to max 1.5 max hours diagnostics would find and give recommendation to resolve the issues.
Last edited by Callisto; Sep 1, 2025 at 10:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post



