My b2600i year 1992 motor does not run
Thread Starter
|
Junior Member
Joined: Aug 2024
Posts: 6
Likes: 0
From: Finland
My b2600i year 1992 motor does not run
After starting the motor runs for few seconds (5-15s) then stalls. After waiting a while the same can be repeated.
The fuel filter has been changed, the ignition distributor has been changed, ECU has been in service. Please advise what to do next. Here in Finland are max 10 to 20 such cars in trafic, spates are really hard to get and deep know-how of that car is absent
The fuel filter has been changed, the ignition distributor has been changed, ECU has been in service. Please advise what to do next. Here in Finland are max 10 to 20 such cars in trafic, spates are really hard to get and deep know-how of that car is absent
Thread Starter
|
Junior Member
Joined: Aug 2024
Posts: 6
Likes: 0
From: Finland
Which component decides that the motor has warmed enough?
In normal conditions when the motor was in full condition happened so that after few seconds the motor "calmed down" to idel revs. Now it seems so that in that very situation the motor shuts down. I personally suspect that the malfunctioning ECU is the root cause.
PS. Sorry my English - Finnish would be easier ;-) .
PS. Sorry my English - Finnish would be easier ;-) .
Senior Member
Joined: Aug 2009
Posts: 653
Likes: 34
From: North Central Florida
Welcome to the forum.
Just checking to make sure that you do have the rubber air tube in place, and the black plastic "Pulsation Chamber" in place with a tight fitting O-Ring on it as it should.
If there are ANY air leaks in the intake system, then the engine may not run very long at all (2 seconds maybe) and then die. Can you post any pictures of the engine as it is now?
Just checking to make sure that you do have the rubber air tube in place, and the black plastic "Pulsation Chamber" in place with a tight fitting O-Ring on it as it should.
If there are ANY air leaks in the intake system, then the engine may not run very long at all (2 seconds maybe) and then die. Can you post any pictures of the engine as it is now?
Thread
Thread Starter
Forum
Replies
Last Post
