Mazda BT 50 & Pickup Trucks While Mazda may not be known for their trucks, they have always produced quality reliable trucks for both hauling cargo, or simply crusing. BT 50

HERE'S A PIC OF MY B5700H.O. ENGINE

  #11  
Old 11-03-2006 | 02:27 AM
Z28_Mazda_B5000's Avatar
Thread Starter
Joined: Sep 2006
Posts: 53
From:
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

i am running stock manifolds now but when i put my new engine in im gona run headers.
 
  #12  
Old 11-03-2006 | 02:53 AM
dan908's Avatar
Joined: Jul 2006
Posts: 71
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

You should unkink your chunk of heater hose... the red one on the top... that is not so good if it is running coolant through it.
 
  #13  
Old 11-04-2006 | 01:52 AM
hazyrider's Avatar
Joined: Nov 2006
Posts: 2
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

tell me about that transplant. I just bought a '87 b2000 and just happen to have a 350/350 sitting in my garage. What about the motor mounts,tranny crossmember, radiator, can I get away with the stock rearend? what type of stock exhaust manifolds did you use? thanks, Matt
 
  #14  
Old 11-04-2006 | 04:40 AM
RawDawg's Avatar
Joined: Jun 2006
Posts: 29
From:
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

i love seeing the v8's in the mazdas, a question for you though is how do you find the handling of the truck with all the added weight in the front?
 
  #15  
Old 11-05-2006 | 02:05 AM
Z28_Mazda_B5000's Avatar
Thread Starter
Joined: Sep 2006
Posts: 53
From:
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

i have many secrets that i guess i can tell about, starting at the front and going back
1974 chevy nova radiator and hoses
engine 1979 chevy van regular 4 bolt 350
standard 73 and newer pick up motor mounts and fabed my own pirches for them i will get measurments for that
tranny turbo 350 long tail shaft
drive shaft just happened to have it i think it is out of a nova i will get a dimension and check for you
engine crossmember custom fabed the stock
tranny crossmember custom fabed the stock
shifter just built my own
tranny mount 79 chevy van
rear end right now 75 olds 98 soon to be a narrowed 9" ford drilled to 6 lug
if you need part #'s i can get them or if youy need anything just ask.

 
  #16  
Old 11-05-2006 | 02:07 AM
Z28_Mazda_B5000's Avatar
Thread Starter
Joined: Sep 2006
Posts: 53
From:
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

i have many secrets that i guess i can tell about, starting at the front and going back
1974 chevy nova radiator and hoses
engine 1979 chevy van regular 4 bolt 350
standard 73 and newer pick up motor mounts and fabed my own pirches for them i will get measurments for that
tranny turbo 350 long tail shaft
drive shaft just happened to have it i think it is out of a nova i will get a dimension and check for you
engine crossmember custom fabed the stock
tranny crossmember custom fabed the stock
shifter just built my own
tranny mount 79 chevy van
rear end right now 75 olds 98 soon to be a narrowed 9" ford drilled to 6 lug
if you need part #'s i can get them or if youy need anything just ask.

 
  #17  
Old 11-18-2006 | 03:02 AM
CheasenKrackerz's Avatar
Joined: Nov 2006
Posts: 1
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

Looking to do a 350 swap on my 91 2600I 4X4 but I want to keep the 4X4, any suggestions, the 2600 is peppy especially with the 5 speed, I just want that v-8 power I had in my old Silverado.

Thanks
 
  #18  
Old 12-12-2006 | 12:21 PM
DrNuts's Avatar
Joined: Dec 2006
Posts: 5
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

Hey I have one of those...Below is my little sleeper








300hp chevy 350 motor
700R4 tranny with a 2600 stall convertor
70 Nova posi rear with 3:42 gears
3" body lift kit
31" tires
 
  #19  
Old 07-06-2007 | 11:59 PM
eflores's Avatar
Joined: Mar 2006
Posts: 63
From:
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

how much body lift did you have to use to get the dizzy and fan to fit?
 
  #20  
Old 03-08-2008 | 05:03 AM
celli's Avatar
Joined: Mar 2008
Posts: 5
Default RE: HERE'S A PIC OF MY B5700H.O. ENGINE

i got a 87b2000 i put a 350 chevy & a gm 5 speed i got the stock rear end and it holds up just fine and i got lader bars as trackshen bars and i cut the fier wall and moved the motor back. the motor mounts are in the same spot as the stock motorand it looks good so if you want pics just email me at celli607@aol.com and give me your email [align=right]
[/align]
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Crossfire69
Mazda RX-8
1
04-07-2007 08:46 PM
Groove_D
Mazda BT 50 & Pickup Trucks
10
10-23-2006 02:05 AM
Groove_D
Mazda BT 50 & Pickup Trucks
1
10-21-2006 11:40 PM
MX SIC
Mazda MX-3 and Mazda MX-6
4
02-09-2006 01:07 AM
MAZDA MAN
Mazda Protege
1
07-11-2005 09:20 PM


Thread Tools
Search this Thread
Quick Reply: HERE'S A PIC OF MY B5700H.O. ENGINE



All times are GMT -5. The time now is 06:53 PM.