Mazda 323,Mazda 626 & Mazda 929 Whether the compact 323, the mid sized 626, or the full sized 929, these vehicles remain very popular even though production has stopped.

626 Missing at idle and on

Old Nov 18, 2005 | 03:44 PM
  #1  
WhiteGTSofDeath's Avatar
Thread Starter
Joined: Nov 2005
Posts: 3
Likes: 0
Default 626 Missing at idle and on

When the car is at idle it will miss and then the idle will start to wander, sometimes almost to the point of stalling. I am trying to help a friend out and normally don't mess with mazda's or 4 cylinder cars. Why would it be missing?

The engine threw a code a few weeks ago and it said "massive egr vacume leak" i tried finding a leak in the egr system, but i couldn't find one. The plugs and wires have been replaced.

 
Reply
Old Nov 18, 2005 | 04:24 PM
  #2  
babyhuey's Avatar
Senior Member
Joined: Jul 2005
Posts: 2,747
Likes: 0
Default RE: 626 Missing at idle and on

What year 626 and what was the code #? Do not remember ever seeing a massive EGR leak code.
 
Reply
Old Nov 18, 2005 | 05:00 PM
  #3  
WhiteGTSofDeath's Avatar
Thread Starter
Joined: Nov 2005
Posts: 3
Likes: 0
Default RE: 626 Missing at idle and on

it is an 03 and no i do not remember the code number offhand
 
Reply
Old Nov 18, 2005 | 09:20 PM
  #4  
babyhuey's Avatar
Senior Member
Joined: Jul 2005
Posts: 2,747
Likes: 0
Default RE: 626 Missing at idle and on

Maybe the EGR valve is sticking open a little. Is this a US car? Last year of 626 was in 2002 in the US. How many miles are on the odometer?
 
Reply
Old Nov 22, 2005 | 02:11 PM
  #5  
WhiteGTSofDeath's Avatar
Thread Starter
Joined: Nov 2005
Posts: 3
Likes: 0
Default RE: 626 Missing at idle and on

It is a US car, it probably is a 2002. It has 60k ish miles.
 
Reply
Old Nov 22, 2005 | 11:27 PM
  #6  
babyhuey's Avatar
Senior Member
Joined: Jul 2005
Posts: 2,747
Likes: 0
Default RE: 626 Missing at idle and on

Several things you might give a look to that have run across in the past. Vacuum diaphram for fuel pressure regualtor ruptured that draws fuel directly in to the intake thru the vacuum supply hose. Hose connects to manifold at the #3 intake runner so #3 plug will be all black and fuel fouled. Intake manifold gasket blown out, usually at the bottom, outer corner of the #1 or #4 runner. Mass air flow sensor contaminated. When running rough, disconnect the sensor and see if condition improves considerably.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sirron9591
Mazda 323,Mazda 626 & Mazda 929
0
Aug 4, 2010 09:48 PM
kctxau
Mazda MPV
1
May 4, 2010 04:16 PM
trex66
Mazda 323,Mazda 626 & Mazda 929
0
Feb 21, 2008 06:10 AM
syrup1
Mazda Millenia
2
Dec 17, 2006 01:32 AM
andy908hamblin
Mazda Millenia
4
Oct 19, 2006 06:10 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:35 AM.