Mazda CX5 2017 rear wheel problems
Thread Starter
|
Member
Joined: Aug 2023
Posts: 36
Likes: 0
From: vista
Mazda CX5 2017 rear wheel problems
Hello
After riding a few miles my rear left wheel makes a rubbing noise randomly then a loud metal sound like spring or something stuck in a gear box (just trying to describe what I hear ..) I took off the wheel, caliper..rotated the wheel bearing...EVERYTHING seem normal . However with re-installed and rotating the rotor it seems like sometimes its slowing down 1/4 of the rotation.....
with the wheel on its tough to.notice anything...
Could my wheel bearing going bad ?
if so would it be grinding all the time ?
Thank you for any help
Not sure I did a great job explaining;((((
After riding a few miles my rear left wheel makes a rubbing noise randomly then a loud metal sound like spring or something stuck in a gear box (just trying to describe what I hear ..) I took off the wheel, caliper..rotated the wheel bearing...EVERYTHING seem normal . However with re-installed and rotating the rotor it seems like sometimes its slowing down 1/4 of the rotation.....
with the wheel on its tough to.notice anything...
Could my wheel bearing going bad ?
if so would it be grinding all the time ?
Thank you for any help
Not sure I did a great job explaining;((((
Senior Member
Joined: Oct 2018
Posts: 10,587
Likes: 229
From: Northern California
Well looking at your info location i have no idea where "vista" is in the world. There are hundreds of them? So, I can suggest what name of shop to recommend.
Also when you as a service question it is so important to state pertinent information .... Miles on odometer and when and what was the last service done ?
But basically, you need to find a service shop that can raise your Mazda on the lift and allow the normal weight bearing suspension. Then possibly the next check would be the "X" support lift that will allow the suspension to hang this will way the service mechanic/technician can start the engine place in a gear to see the operation and check for noises.
Also when you as a service question it is so important to state pertinent information .... Miles on odometer and when and what was the last service done ?
But basically, you need to find a service shop that can raise your Mazda on the lift and allow the normal weight bearing suspension. Then possibly the next check would be the "X" support lift that will allow the suspension to hang this will way the service mechanic/technician can start the engine place in a gear to see the operation and check for noises.
I see that you live in
Thread Starter
|
Member
Joined: Aug 2023
Posts: 36
Likes: 0
From: vista
Well looking at your info location i have no idea where "vista" is in the world. There are hundreds of them? So, I can suggest what name of shop to recommend.
Also when you as a service question it is so important to state pertinent information .... Miles on odometer and when and what was the last service done ?
But basically, you need to find a service shop that can raise your Mazda on the lift and allow the normal weight bearing suspension. Then possibly the next check would be the "X" support lift that will allow the suspension to hang this will way the service mechanic/technician can start the engine place in a gear to see the operation and check for noises.
Also when you as a service question it is so important to state pertinent information .... Miles on odometer and when and what was the last service done ?
But basically, you need to find a service shop that can raise your Mazda on the lift and allow the normal weight bearing suspension. Then possibly the next check would be the "X" support lift that will allow the suspension to hang this will way the service mechanic/technician can start the engine place in a gear to see the operation and check for noises.
Ok.thank.you
Thread
Thread Starter
Forum
Replies
Last Post
Sanc7
Sights N Sounds
2
Oct 4, 2024 07:40 AM
