new mazda6
#1
new mazda6
Hi,everybody,
i'm from Romania and i have a new Mazda6 2,5-new model.
the car is good ,but i have one problem.one front wheel -from the beginning-can not be alligniate with the other,has some difference.
it affect only the direction-i have to keep the steering not to go to right side of the road.
can pls advise if anything can be done?
Also,i'm interested if u have some tuning parts for Mazda 6.
Sorry for any inconvenience caused by my English.
Rgds,
Tiberius
i'm from Romania and i have a new Mazda6 2,5-new model.
the car is good ,but i have one problem.one front wheel -from the beginning-can not be alligniate with the other,has some difference.
it affect only the direction-i have to keep the steering not to go to right side of the road.
can pls advise if anything can be done?
Also,i'm interested if u have some tuning parts for Mazda 6.
Sorry for any inconvenience caused by my English.
Rgds,
Tiberius
#2
RE: new mazda6
Have you taken it back to the dealer to have it checked out? something has to be out of adjustment.
If it tracks straight, but you have to keep the wheel off-center, it's most likely a very simple tie-rod end adjustment to center the steering wheel. You would want to have it properly aligned afterwards to make sure you didn't mess up the toe setting of the front suspension. (Improper toe will cause abnormal wear/feathering of the tire tread)
It should track straight with no pull in the wheel (and the wheel is centered.)
If it tracks straight, but you have to keep the wheel off-center, it's most likely a very simple tie-rod end adjustment to center the steering wheel. You would want to have it properly aligned afterwards to make sure you didn't mess up the toe setting of the front suspension. (Improper toe will cause abnormal wear/feathering of the tire tread)
It should track straight with no pull in the wheel (and the wheel is centered.)
#3
RE: new mazda6
hi,
i've been and everything is ok,exception that one wheel is a very little in front of the other.
It will cause no improper wear or feathering of the wheel,just a little disconfort that i have to keep
the steering straight.
My oppinion is from the manufacturer because there is no hitting marks under the car.
Any clue about some tuning accesories about this type of mazda?
rgds,
Tibi
i've been and everything is ok,exception that one wheel is a very little in front of the other.
It will cause no improper wear or feathering of the wheel,just a little disconfort that i have to keep
the steering straight.
My oppinion is from the manufacturer because there is no hitting marks under the car.
Any clue about some tuning accesories about this type of mazda?
rgds,
Tibi
#4
RE: new mazda6
Not sure what you mean by one tire in front of the other. They should be in exactly the same spot fore/aft along the length of the vehicle.
There are 4 components to the alignment of your front suspension.
Caster
Camber
Toe
Centering
The car is not designed to make you keep the wheel off-center to go down the road.
There are 4 components to the alignment of your front suspension.
Caster
Camber
Toe
Centering
The car is not designed to make you keep the wheel off-center to go down the road.
#5
RE: new mazda6
Caster is the problem.
left wheel is about 1 cm in front of the axel.
Toe,camber,Setback of the front and Camber,Toe ,Thrust( Geometrical driving axis),kingpin inclination are OK.
The tendencies are to go to the right.Not immediately,but in about 100 meters .
Due to the fact the roads are not perfect,i didn't realised until i checked after a flat tyre.
left wheel is about 1 cm in front of the axel.
Toe,camber,Setback of the front and Camber,Toe ,Thrust( Geometrical driving axis),kingpin inclination are OK.
The tendencies are to go to the right.Not immediately,but in about 100 meters .
Due to the fact the roads are not perfect,i didn't realised until i checked after a flat tyre.
#6
RE: new mazda6
Caster has more effect on the self-centering nature of your steering than it pulling to the right/left.
Are you saying your dealership tried to adjust it and can't get it within specification? Is this a brand new car?
Are you saying your dealership tried to adjust it and can't get it within specification? Is this a brand new car?
Thread
Thread Starter
Forum
Replies
Last Post