Wiring Question Radio Side Harness 2007 Mazda 6 without Bose
#1
06-21-2020, 02:46 PM
Wiring Question Radio Side Harness 2007 Mazda 6 without Bose
I am building a T harness to wire in an amp into the factory wiring. I have a standard metra harness as well as a reverse harness so that I do not need to modify the factory wiring.
The reverse harness (into radio) has about 6 additional wires than the vehicle side harness.
I want to know what each represents on both the radio side and vehicle side so that I can add new pins to the standard harness.
The reverse harness (into radio) has about 6 additional wires than the vehicle side harness.
I want to know what each represents on both the radio side and vehicle side so that I can add new pins to the standard harness.
#2
06-21-2020, 08:06 PM
I would say at a guess, the harness is used for more than just your exact model, so its pre wired with wires used on other models, not just your's.
Thread
Thread Starter
Forum
Replies
Last Post