04 mazda6 4cyl...driving about 80km car looses power and will not drive but was running rough....got it towed to find out my oil filter housing cracked and oil ran out through it...got it replaced but now cmp senor is on and car will not start....changed cmp crank sensor and distributor...car still not starting....initially u get a spark but after 1 sec engine will stop sparking....did a compression test all 4 cyl...the cylinders are over 120....checked to se if my timming jump but it's fine.....any suggestion's????

 

Did all the oil leak out when the housing cracked? If so, you have a million different places the engine could have warped/cracked/deformed which would lead to a lack of compression. Hopefully thats not the case!