Accessing and replacing 80 amp PS fuse
Thread Starter
|
Junior Member
Joined: Mar 2025
Posts: 1
Likes: 0
Accessing and replacing 80 amp PS fuse
Hi y'all. I have a 2010 Mazda 5 with a blown power steering fuse. I have the replacement, and I know this fuse is attached by a couple of 10mm bolts (so can't be pulled like other fuses). But I can't work out how to do that. Has anyone had luck in accessing the bolts underneath? I've got the airbox removed, but can't seem to move farther than that. Thank for any help y'all can give.
Senior Member
Joined: Oct 2018
Posts: 10,627
Likes: 231
From: Northern California
Hi y'all. I have a 2010 Mazda 5 with a blown power steering fuse. I have the replacement, and I know this fuse is attached by a couple of 10mm bolts (so can't be pulled like other fuses). But I can't work out how to do that. Has anyone had luck in accessing the bolts underneath? I've got the airbox removed, but can't seem to move farther than that. Thank for any help y'all can give.
there is some carefull electrical disconnects and removals that needs to be done. The best advise is pay a few bucks and get the "EXACT" service procedure from ALLData.
Do It Yourself Automotive Repair Information | ALLDATA DIY
20 bucks you could actually download a complete service guide for your Mazda which is exactly and at times upgrades from the Mazda ( and other makes) factory service guide and manuals.
Thread
Thread Starter
Forum
Replies
Last Post