Does anybody have a diagram of where I can find the low pressure switch on a 2009 2.3? It's looking like I probably have to take the front passenger wheel off to get to it.
My AC isn't working and it seems like it's just not kicking on at all. Normally I can feel or hear the compressor start turning and it just stopped. I'm thinking it's some sort of switch. The fuses and relays appear to be fine. I'd like to test it before ordering a part and ideally if I can before jacking it up and getting underneath (or taking off a wheel).

Thank you in advance.

 

If I'm not mistaken, it should be on one of the hard lines. There should only be one connector plugged into the hard line, it should be the pressure switch. It should be somewhere close to the firewall, on the passenger side, and in theory should have green/orange, grey, and 2 black/white wires coming out of it.

 

I'll take a look there. Thank you so much!