1.4 Diesel Rear Engine Mount DE
Thread Starter
|
Junior Member
Joined: Jan 2020
Posts: 16
Likes: 0
From: Chester
1.4 Diesel Rear Engine Mount DE
Hi all,
Need to replace the rear engine mount because it has had its day. However, I'm having a bit of an issue with what part to buy. Looking under the car, the engine mount looks like the one found in the DY models and in the Ford Fiesta's. However, the actual part for the DE on Ebay looks nothing like the one on the car. I've seen on the petrol's it is this type but I can not seem to find a rear engine mount for the 1.4 Diesel.
Does anybody know what part it or if there is an OEM number.
I'm going to ring Mazda tomorrow, but would be grand if anyone has any knowledge about it?
Thanks in Advance.
Need to replace the rear engine mount because it has had its day. However, I'm having a bit of an issue with what part to buy. Looking under the car, the engine mount looks like the one found in the DY models and in the Ford Fiesta's. However, the actual part for the DE on Ebay looks nothing like the one on the car. I've seen on the petrol's it is this type but I can not seem to find a rear engine mount for the 1.4 Diesel.
Does anybody know what part it or if there is an OEM number.
I'm going to ring Mazda tomorrow, but would be grand if anyone has any knowledge about it?
Thanks in Advance.
Thread Starter
|
Junior Member
Joined: Jan 2020
Posts: 16
Likes: 0
From: Chester
Okay an update, for anyone who might need this for future reference.
I called Mazda and asked for a part number who basically told me to get lost, and told me that they can source the part for none less than £124.
So I thought, right just use the Fiesta/ Mazda 2 DY mount.
The part is identical for this model and it does fit, however, the brackets are slightly different meaning it will not fit if you use the bracket that is on the new mount. You have to get a hammer and smash it hell for leather until it comes off, this has to be done on the new and old mounts to swap them. The hex key (the best way of describing it) that it fits on does not entirely line up either on the new mount, making it an absolute pain, however because it is an interference fit you can just slave the old bracket onto the new mount when its on the car, the force of the bolt as its torques up takes up any slack and does fit.
It is more of a pain because of this but the Ford part cost £17.99, so it quite a saving :-)
It is quite difficult to explain but hopefully this will help someone if they have the same problem on their 1.4 in the future.
However, the petrol engine mounts are different again so this is only for the 1.4cd.
I called Mazda and asked for a part number who basically told me to get lost, and told me that they can source the part for none less than £124.
So I thought, right just use the Fiesta/ Mazda 2 DY mount.
The part is identical for this model and it does fit, however, the brackets are slightly different meaning it will not fit if you use the bracket that is on the new mount. You have to get a hammer and smash it hell for leather until it comes off, this has to be done on the new and old mounts to swap them. The hex key (the best way of describing it) that it fits on does not entirely line up either on the new mount, making it an absolute pain, however because it is an interference fit you can just slave the old bracket onto the new mount when its on the car, the force of the bolt as its torques up takes up any slack and does fit.
It is more of a pain because of this but the Ford part cost £17.99, so it quite a saving :-)
It is quite difficult to explain but hopefully this will help someone if they have the same problem on their 1.4 in the future.
However, the petrol engine mounts are different again so this is only for the 1.4cd.
Member
Joined: Jul 2019
Posts: 60
Likes: 0
From: Sheffield
I had a similar problem replacing the top drivers side (UK) engine mount, the hydro one. Mazda dealer would not just sell me the mount, they said i HAD to book it in for a diagnosis first.
I took to looking on ebay for it and I found that the mk7 fiesta mount looked identical and was around £30 cheaper than the "mazda" ones.
Even the original mount i removed from the car had the FoMoCo logo stamped on it.
Same with rear shock absorbers, bought fiesta mk7 rear shocks which are identical but cheaper than "Mazda 2 DE" ones.
I took to looking on ebay for it and I found that the mk7 fiesta mount looked identical and was around £30 cheaper than the "mazda" ones.
Even the original mount i removed from the car had the FoMoCo logo stamped on it.
Same with rear shock absorbers, bought fiesta mk7 rear shocks which are identical but cheaper than "Mazda 2 DE" ones.
Junior Member
Joined: Feb 2020
Posts: 8
Likes: 0
From: U.K
Sounds about right,shame that Mazda can be so uncooperative,mind ,it do cost loads?? i spose for the tech peoples training,
this site gives the different models and comparairable and shares between manufactuers,it seems?? pretty accurate
https://www.automobile-catalog.com/
this page if it works for Mazda 2 and looking at Ford fiesta stuff (cross ref)
https://www.automobile-catalog.com/m...da/2_2gen.html
.............................ta
this site gives the different models and comparairable and shares between manufactuers,it seems?? pretty accurate
https://www.automobile-catalog.com/
this page if it works for Mazda 2 and looking at Ford fiesta stuff (cross ref)
https://www.automobile-catalog.com/m...da/2_2gen.html
.............................ta
Last edited by jjo; Mar 12, 2020 at 04:24 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Governor
Mazda 323,Mazda 626 & Mazda 929
0
Dec 11, 2006 10:18 PM
