Solid axle swap
#1
02-03-2009, 09:29 PM
Solid axle swap
Just wondering what everyone thought.
It started as a 1991 mazda i trashed the front suspension and went with custom haha. I used stock chevy 1 ton springs and just took out a few leafs for flex and set them on top of a dana 60 and for the back used matchig gm 14 bolt with same springs and a 4 inch block to level it out. I didnt quite make it for custom driveshafts but soon decided i wanted some more lift. I stold some from my dad off the back of an f250 and setting them side by side they are going to give me 5 more inches of lift and im thinking about making some drop brackets to give me even more. I had 42x15x16.5 tsl's on it and they cleared but id like more room. I dropped a stock 350 in it but that didnt work so im currently building a 383. If I figure out how to post pictures I will.
It started as a 1991 mazda i trashed the front suspension and went with custom haha. I used stock chevy 1 ton springs and just took out a few leafs for flex and set them on top of a dana 60 and for the back used matchig gm 14 bolt with same springs and a 4 inch block to level it out. I didnt quite make it for custom driveshafts but soon decided i wanted some more lift. I stold some from my dad off the back of an f250 and setting them side by side they are going to give me 5 more inches of lift and im thinking about making some drop brackets to give me even more. I had 42x15x16.5 tsl's on it and they cleared but id like more room. I dropped a stock 350 in it but that didnt work so im currently building a 383. If I figure out how to post pictures I will.
#2
02-03-2009, 09:30 PM
http://viewmorepics.myspace.com/inde...ageID=51540674
http://viewmorepics.myspace.com/inde...ageID=51540669
http://viewmorepics.myspace.com/inde...ageID=51540669
Last edited by mazdabogger; 02-03-2009 at 09:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
KBJ!MP5
General Tech
0
04-07-2015 01:22 PM
loup_cool666
General Tech
0
03-03-2010 08:54 PM
