Mazda Forum - Mazda Enthusiast Forums

Mazda Forum - Mazda Enthusiast Forums (https://www.mazdaforum.com/forum/)
-   Mazda Millenia (https://www.mazdaforum.com/forum/mazda-millenia-19/)
-   -   Millenia 2000 (https://www.mazdaforum.com/forum/mazda-millenia-19/millenia-2000-a-17216/)

jhlamothe Jan 17, 2009 12:40 PM

Millenia 2000
 
I am still unable to find part# or supplier for the ABV vent selenoid Assy for the 2000 2.3l supercharged. Please help I'm unable to get sticker in mass because of this and already have two tickets from Da" Man

keninn Jan 21, 2009 11:53 AM

RE: Millenia 2000
 
yo

vent solenoid-KJ03-18-741A
vacuum KJ02-18-741A

P1525 is vent. 1526 is vacuum. ohm them out. and stop double posting

jhlamothe Jan 22, 2009 10:13 AM

RE: Millenia 2000
 
Thanks for the part#'s.
Sorry I'm new to posting and was unsure if it was up.
Thanks again.
P.P.S. With engine off they should read open or Hi-Impedance? correct?

keninn Jan 22, 2009 07:18 PM

RE: Millenia 2000
 
no, impedance should be less than 30, but not below 20. around 26 for new. if 0, then no good. if high, like 50-60, they are dying. if really hi, like 90, they are dead. usually the vacuum solenoid goes. i get most of my parts from tasca mazda in rhode island, they used to stock the vacuum solenoid, and they have the best prices on the web.

Heinz Feb 9, 2009 12:48 PM

Malinium 2001 S
 
Is the part number for the ABV and Vent for 2000M S the same as the 2001M S? I too need both badly. Looking for a distributor who will ship overseas. Stationed in Germany. Heinz

keninn Feb 10, 2009 08:18 AM


Originally Posted by Heinz (Post 86559)
Is the part number for the ABV and Vent for 2000M S the same as the 2001M S? I too need both badly. Looking for a distributor who will ship overseas. Stationed in Germany. Heinz

yup. same part numbers for all years of the mc motor. i would think any online dealer would ship overseas. i use tasca mazda a lot, they are in rhode island. last time i got the solenoids, tasca had the vacuum in stock, i air'd it, and it solved my problem.

Heinz Feb 12, 2009 01:04 PM

Malinium 2001 S
 

Originally Posted by keninn (Post 85165)
yo

vent solenoid-KJ03-18-741A
vacuum KJ02-18-741A

P1525 is vent. 1526 is vacuum. ohm them out. and stop double posting


I was just quoted $79.95 for both above. Is that reasonable? Heinz

Heinz Feb 12, 2009 01:07 PM

Malinium 2001 S
 

Originally Posted by keninn (Post 86623)
yup. same part numbers for all years of the mc motor. i would think any online dealer would ship overseas. i use tasca mazda a lot, they are in rhode island. last time i got the solenoids, tasca had the vacuum in stock, i air'd it, and it solved my problem.

Which Tasca Mazda RI. There are about 5 of them. Heinz

keninn Feb 12, 2009 05:29 PM


Originally Posted by Heinz (Post 86778)
Which Tasca Mazda RI. There are about 5 of them. Heinz

http://www.tascafordparts.com//index.do

5 tasca mazda dealers in ri?

keninn Feb 12, 2009 05:31 PM


Originally Posted by Heinz (Post 86777)
I was just quoted $79.95 for both above. Is that reasonable? Heinz

74.63 is suggested list. tasca discounted price, 51.49


All times are GMT -5. The time now is 09:19 AM.


© 2026 MH Sub I, LLC dba Internet Brands