Mazda Millenia This sedan, the flagship luxury sedan, offers both a naturally aspirated and supercharged model, so you can have your luxury, and, if you have a need for speed, big horsepower.

Millenia 2000

Thread Tools
 
Search this Thread
 
Old Jan 17, 2009 | 12:40 PM
  #1  
jhlamothe's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2008
Posts: 5
Likes: 0
Default Millenia 2000

I am still unable to find part# or supplier for the ABV vent selenoid Assy for the 2000 2.3l supercharged. Please help I'm unable to get sticker in mass because of this and already have two tickets from Da" Man
 
Reply
Old Jan 21, 2009 | 11:53 AM
  #2  
keninn's Avatar
Senior Member
Joined: Sep 2005
Posts: 983
Likes: 0
From:
Default RE: Millenia 2000

yo

vent solenoid-KJ03-18-741A
vacuum KJ02-18-741A

P1525 is vent. 1526 is vacuum. ohm them out. and stop double posting
 
Reply
Old Jan 22, 2009 | 10:13 AM
  #3  
jhlamothe's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2008
Posts: 5
Likes: 0
Default RE: Millenia 2000

Thanks for the part#'s.
Sorry I'm new to posting and was unsure if it was up.
Thanks again.
P.P.S. With engine off they should read open or Hi-Impedance? correct?
 
Reply
Old Jan 22, 2009 | 07:18 PM
  #4  
keninn's Avatar
Senior Member
Joined: Sep 2005
Posts: 983
Likes: 0
From:
Default RE: Millenia 2000

no, impedance should be less than 30, but not below 20. around 26 for new. if 0, then no good. if high, like 50-60, they are dying. if really hi, like 90, they are dead. usually the vacuum solenoid goes. i get most of my parts from tasca mazda in rhode island, they used to stock the vacuum solenoid, and they have the best prices on the web.
 
Reply
Old Feb 9, 2009 | 12:48 PM
  #5  
Heinz's Avatar
Junior Member
Joined: Jan 2009
Posts: 12
Likes: 0
From: Germany
Default Malinium 2001 S

Is the part number for the ABV and Vent for 2000M S the same as the 2001M S? I too need both badly. Looking for a distributor who will ship overseas. Stationed in Germany. Heinz
 
Reply
Old Feb 10, 2009 | 08:18 AM
  #6  
keninn's Avatar
Senior Member
Joined: Sep 2005
Posts: 983
Likes: 0
From:
Default

Originally Posted by Heinz
Is the part number for the ABV and Vent for 2000M S the same as the 2001M S? I too need both badly. Looking for a distributor who will ship overseas. Stationed in Germany. Heinz
yup. same part numbers for all years of the mc motor. i would think any online dealer would ship overseas. i use tasca mazda a lot, they are in rhode island. last time i got the solenoids, tasca had the vacuum in stock, i air'd it, and it solved my problem.
 
Reply
Old Feb 12, 2009 | 01:04 PM
  #7  
Heinz's Avatar
Junior Member
Joined: Jan 2009
Posts: 12
Likes: 0
From: Germany
Default Malinium 2001 S

Originally Posted by keninn
yo

vent solenoid-KJ03-18-741A
vacuum KJ02-18-741A

P1525 is vent. 1526 is vacuum. ohm them out. and stop double posting

I was just quoted $79.95 for both above. Is that reasonable? Heinz
 
Reply
Old Feb 12, 2009 | 01:07 PM
  #8  
Heinz's Avatar
Junior Member
Joined: Jan 2009
Posts: 12
Likes: 0
From: Germany
Default Malinium 2001 S

Originally Posted by keninn
yup. same part numbers for all years of the mc motor. i would think any online dealer would ship overseas. i use tasca mazda a lot, they are in rhode island. last time i got the solenoids, tasca had the vacuum in stock, i air'd it, and it solved my problem.
Which Tasca Mazda RI. There are about 5 of them. Heinz
 
Reply
Old Feb 12, 2009 | 05:29 PM
  #9  
keninn's Avatar
Senior Member
Joined: Sep 2005
Posts: 983
Likes: 0
From:
Default

Originally Posted by Heinz
Which Tasca Mazda RI. There are about 5 of them. Heinz
http://www.tascafordparts.com//index.do

5 tasca mazda dealers in ri?
 
Reply
Old Feb 12, 2009 | 05:31 PM
  #10  
keninn's Avatar
Senior Member
Joined: Sep 2005
Posts: 983
Likes: 0
From:
Default

Originally Posted by Heinz
I was just quoted $79.95 for both above. Is that reasonable? Heinz
74.63 is suggested list. tasca discounted price, 51.49
 
Reply



All times are GMT -5. The time now is 05:53 AM.