Mazda Radio Harness
#1
Mazda Radio Harness
So I am currently in the process of writing up a diagram for my B2200 wiring harness. As I am using a duetsch style connector for the head unit, and the harness in the truck it's self. Everything seems straight foward speaker wise and power wise. However the Blue/White is the illumination wire. On my head unit, which is an Alpine 7292LS. I have White/Blue for Dimmer Control Lead, then it goes Audio Interuppt lead which is a Pink/White wire. Logically speaking, would I be correct on hooking up the White/Blue wire for the illumination wire on the mazda side?
By the way this is the full wiring list for my head unit, incase I am wrong.
White/Black - Left Front Speaker (-)
Gray/Black - Right Front Speaker (-)
White Left Front Speaker (+)
Gray Right Front Speaker (+)
White/Blue - Dimmer Control
Pink/White - Audio Interuppt
Blue - Power Antenna
Blue/White - Turn on Lead
Red - Switched Power Lead
Yellow - Battetry Lead.
Thanks in advance for any help.
Edit: Crossed my wires. (I would be horrible at defusing a bomb)
By the way this is the full wiring list for my head unit, incase I am wrong.
White/Black - Left Front Speaker (-)
Gray/Black - Right Front Speaker (-)
White Left Front Speaker (+)
Gray Right Front Speaker (+)
White/Blue - Dimmer Control
Pink/White - Audio Interuppt
Blue - Power Antenna
Blue/White - Turn on Lead
Red - Switched Power Lead
Yellow - Battetry Lead.
Thanks in advance for any help.
Edit: Crossed my wires. (I would be horrible at defusing a bomb)
Thread
Thread Starter
Forum
Replies
Last Post