ok i got a mazda b 2600+ 93 model 4x4 and i love it . But i also got a huge problem
first it happens randomly that the car did not start up , but i figured out if i wait a 2 to 5 min then its startup, till last week it want fire up at all.
very quickly i found out there are no sparks coming from the ignition coil. Got a new one and try to start the car . nothing happens no spark from the NEW ignition coil but power on the plug . after going tru all mazda forums i found out that there is a smal part behind the ignition coil , called igniter and here is my problem . it is a 2 pin plug mazda told me that this part is not availble any more no way to get it but i found somthing on the net with 3 pin here ( https://www.partsgeek.com/mmparts/ig...zda/b2600.html) . my question is can i used and what or how to rewire the car for the 3 pin plug anything with electric on the car is always a nightmarte for me

thx



+ plus i have to say that i,m living in the bush 60 km one way from nearest town and 250 km from nearest madza garage thats make it very hard to bring the car in

 

Contact Scotch at the site B2600i.com | Mazda Truck ECMs, Parts, Troubleshooting for B2600i B2600 B2200 B2000. Engine Control Modules, ECM ECU, Brain Box, New & Used Parts, & Repair, or post your question at MazdaTrucking.com