Mazda 323,Mazda 626 & Mazda 929 Whether the compact 323, the mid sized 626, or the full sized 929, these vehicles remain very popular even though production has stopped.

Brake lights problem

Old Jul 28, 2005 | 06:40 AM
  #1  
rak's Avatar
rak
Thread Starter
Joined: Jul 2005
Posts: 2
Likes: 0
Default Brake lights problem

Hello,

I am new to this forum and hope someone can help me with this "strange" problem.
I don't know when it started but when i brake the brake lights come on, but also the headlights turn on. Appart from that the clock on the dashboard fades as wel. The other thing that is not right, when i turn on the headlights... the third brake light also turns on... and that one should only come on when i brake!

I hope someone can help me with this. Its a 1997 Mazda 323; sedan 1.5. I have not noticed anything until a week or so ago... and the only thing i can think of is that i have replaced a rear light bulb in januari... I don't know if the two are related or not .

Thanx in advance
 
Reply
Old Jul 29, 2005 | 10:51 PM
  #2  
babyhuey's Avatar
Senior Member
Joined: Jul 2005
Posts: 2,747
Likes: 0
Default RE: Brake lights problem

Double check that bulb you installed. If a single element 1156 bulb is installed in a socket designed for a 1157 dual element bulb or visa-versa voltage can short between the terminals inside socket and feed over to another circuit. Look at the underside of the bulb ( the part you plug into the socket ) and see if it has one or two gray lumps on it . then look inside the socket and see if there are one or two contacts inside. Must match or will have all kinds of problems.
 
Reply
Old Aug 2, 2005 | 11:52 AM
  #3  
rak's Avatar
rak
Thread Starter
Joined: Jul 2005
Posts: 2
Likes: 0
Default RE: Brake lights problem

Thanks for the reply babyhuey!

You were near to solving the problem... it was indeed the light bulb... although it was the right type (the one with 2 contacts). What happend was that one of the the bulb "tungsten" wires (the one that glows) was a bit long and sort of welded itself to the other tungsten wire holder. There fore i did not notice anything in the beginning, it probably happend after i went over a bump and braked or something.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kgzak
Mazda5
0
Aug 7, 2015 12:23 PM
schlompie
Mazda3
7
Mar 6, 2012 02:49 PM
mtarajia
Mazda3
0
May 15, 2007 02:24 PM
the_gray_mazda6
Mazda6
56
Jun 13, 2006 12:58 PM
lyn314
Mazda Protege
2
Jul 28, 2005 11:12 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:14 PM.