1994 Mazda 929
#1
1994 Mazda 929
1994 Mazda 929 shows codes 2, 3, and 16
2- no Ne 2 signal
3- no G signal
16- EGR position sensor
Here's the problem (the real one). This vehicle has a brand new distributor, crank angle sensor, and engine computer. The wires that go from the crank angle sensor and distributor get all the way to the computer (have continuity all the way there). Still, code 2 and 3. I'm pretty sure I know what the 16 is from and will deal with that on my own. The 2 and 3, however, are driving me up the walls. I have checked out the commonalities these items have (on a wiring diagram) and they seem to have a ground in common. I tested the ground wire at the dist and CAS- yup, they ground out fine. Someone who really knows their stuff- gimme a hand?
-Alicia Sierrawolfe
2- no Ne 2 signal
3- no G signal
16- EGR position sensor
Here's the problem (the real one). This vehicle has a brand new distributor, crank angle sensor, and engine computer. The wires that go from the crank angle sensor and distributor get all the way to the computer (have continuity all the way there). Still, code 2 and 3. I'm pretty sure I know what the 16 is from and will deal with that on my own. The 2 and 3, however, are driving me up the walls. I have checked out the commonalities these items have (on a wiring diagram) and they seem to have a ground in common. I tested the ground wire at the dist and CAS- yup, they ground out fine. Someone who really knows their stuff- gimme a hand?
-Alicia Sierrawolfe
Thread
Thread Starter
Forum
Replies
Last Post
sherrid36
Mazda 323,Mazda 626 & Mazda 929
2
06-13-2008 10:19 AM