General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Mazda 6 - Problems starting

Old Jun 14, 2007 | 12:41 PM
  #1  
artemi's Avatar
Thread Starter
Joined: Jun 2007
Posts: 2
Likes: 0
Default Mazda 6 - Problems starting

hi everyone,

i have a new mazda 6 and when i leave my car out on a hot day, it has problems starting right away. when i turn the ignition key, i hear the cranking noise (like when you hear if you have a dead battery). it only starts after 15minutes of trying. has anyone experienced this problem? any help would be appreciated.

thanks
 
Reply
Old Jun 14, 2007 | 07:57 PM
  #2  
mazzfan's Avatar
Joined: Oct 2005
Posts: 107
Likes: 0
Default RE: Mazda 6 - Problems starting

have you checked the starter or battery? there are lots of possible causes why it won't start: No petrol, no fuel pressure, injectors not being fired, no ignition spark - it could be because of a bad ignition coil or bad rotor arms, or there is a dirty connections. try to look on these things. a friend of mine had problem starting, after inspecting all his mazda 3 parts it turned out that his ignition module was bad.. good luck, hope yours would be fixed soon.
 
Reply
Old Jul 11, 2008 | 07:01 PM
  #3  
NEED  HELP  BADDLY's Avatar
Joined: Jul 2008
Posts: 5
Likes: 0
Default RE: Mazda 6 - Problems starting

I am having this same problem but with my truck. I have been researching it a lot today and it seems like a pretty common mazda problem actually. I have done a bunch of crap to my truck with no results including the ignition module, fuel filter. battery, plugs/wires, and engine coolent temp sesor. Over all I think you might have the same demon possesing your car that is possesing mine. Good luck and let me know if ya ever fix it.
 
Reply
Old Mar 3, 2012 | 08:17 AM
  #4  
mykelp's Avatar
Junior Member
Joined: Mar 2012
Posts: 3
Likes: 0
Default purge solinoid

It could be your purge solinoid which is part of your evaporative systm check into it commonly mis diagnosed
 
Reply
Old Mar 7, 2012 | 01:49 AM
  #5  
Big Money's Avatar
Member
Joined: Mar 2011
Posts: 42
Likes: 0
Default

ambient air temp sensor, go to your dealer, On a new 6 it needs a pcm reflash
 
Reply
Old Mar 7, 2012 | 01:57 AM
  #6  
Big Money's Avatar
Member
Joined: Mar 2011
Posts: 42
Likes: 0
Default

on some models if the sun heats up the hood too much than it throws off the computer. in that situation a recalibration of the control module is the only fix
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pgp
Mazda 323,Mazda 626 & Mazda 929
0
Nov 18, 2010 02:43 PM
artemi
Mazda6
0
Jun 14, 2007 12:42 PM
freeflyur2
Mazda Miata (MX-5)
1
May 25, 2006 04:50 PM
redpeppers
Mazda 323,Mazda 626 & Mazda 929
4
Mar 25, 2006 03:08 PM
michael929
Mazda 323,Mazda 626 & Mazda 929
0
Feb 27, 2006 03:57 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:02 AM.