General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Mazda 3 2006 remote locking often doesn't work

Thread Tools
 
Search this Thread
 
Old Feb 15, 2016 | 08:33 AM
  #1  
Sabotin's Avatar
Thread Starter
|
Junior Member
Joined: Feb 2016
Posts: 2
Likes: 0
From: Slovenia
Default Mazda 3 2006 remote locking often doesn't work

Hi,

Thanks in advance for any help anyone can offer.

I have a 2006 Mazda3. I have had it about 3 months and have found the remote central locking only works sometimes. When I get out the car and close the door and press the fob lock button, sometimes the car locks, often it doesn't. Locking the car by the key in the door always works.

I have changed both batteries in both my remote key fobs and they work ok. I have discovered sometimes if I open the door again, put the key in the ignition, turn it on and back off, then close the door, they key fob will lock the car.

Any advice on where to start in fixing this would be really appreciated.
 
Reply
Old Feb 17, 2016 | 06:59 AM
  #2  
peedee's Avatar
Member
Joined: Jan 2015
Posts: 71
Likes: 0
From: Australia
Default

I would see if you can get a replacement fob off ebay as the micro switches inside the fob on the circuit board may be worn or damaged
 
Reply
Old Feb 17, 2016 | 08:09 AM
  #3  
Sabotin's Avatar
Thread Starter
|
Junior Member
Joined: Feb 2016
Posts: 2
Likes: 0
From: Slovenia
Default

Originally Posted by peedee
I would see if you can get a replacement fob off ebay as the micro switches inside the fob on the circuit board may be worn or damaged

Both of my keyfobs aren't working. I'm afraid that keyfob isn't the problem.. Or ?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dsmx
General Tech
2
Jan 26, 2009 10:42 PM
racergirl435
Mazda6
7
Jan 18, 2009 04:48 PM
Thelonius
Mazda BT 50 & Pickup Trucks
8
Nov 27, 2008 05:21 PM
goddessphoto
Mazda6
5
Aug 25, 2005 05:51 PM




All times are GMT -5. The time now is 12:36 PM.