K&N Typhoon Intake - 2014-2015 Mazda 6- SOLD
Thread Starter
|
Junior Member
Joined: Aug 2014
Posts: 12
Likes: 0
From: Johnstown, PA
K&N Typhoon Intake - 2014-2015 Mazda 6- SOLD
I have a used K&N intake kit for sale. (K&N Part # 69-6032TS) I had it in my 2014 Mazda 6 2.5 liter Touring. It will work in the 2015 Mazda 6's also.
I put it in when my car I had about 3700 miles on it and took it off at approximately 4700 miles. It was only in my car for about 1000 miles and is like new. and the extra sound is great for me, but not to my wife. She is the primary driver and wanted the manufacturer air box back in it. You don't notice the extra sound when cruising, but do when accelerating. There is a noticeable power increase in the mid to upper rpms.
I used a decibel application on my cell phone, and it is about 5 decibels louder than the factory setup when floored. With the pedal to the floor, my car was at 68 decibels factory and was at 73 decibels with the K&N intake kit.
I want to get $200 plus shipping out of this. I paid $275. It is simple to put in and I'll include the instructions for the 14' - 15' Mazda 6. Note: It will be even easier to put in now since it is preassembled.
Here is a link to the K&N website page to see exactly what you will be getting. 69-6032TS - K&N Intake Kits, Performance Intake Kit
If you have any questions, please don't hesitate to ask.
I live near Johnstown, Pennsylvania and am willing to ship it out to you or meet in person locally. I prefer a cashier's check from a bank. I will ship when the check clears.
I put it in when my car I had about 3700 miles on it and took it off at approximately 4700 miles. It was only in my car for about 1000 miles and is like new. and the extra sound is great for me, but not to my wife. She is the primary driver and wanted the manufacturer air box back in it. You don't notice the extra sound when cruising, but do when accelerating. There is a noticeable power increase in the mid to upper rpms.
I used a decibel application on my cell phone, and it is about 5 decibels louder than the factory setup when floored. With the pedal to the floor, my car was at 68 decibels factory and was at 73 decibels with the K&N intake kit.
I want to get $200 plus shipping out of this. I paid $275. It is simple to put in and I'll include the instructions for the 14' - 15' Mazda 6. Note: It will be even easier to put in now since it is preassembled.
Here is a link to the K&N website page to see exactly what you will be getting. 69-6032TS - K&N Intake Kits, Performance Intake Kit
If you have any questions, please don't hesitate to ask.
I live near Johnstown, Pennsylvania and am willing to ship it out to you or meet in person locally. I prefer a cashier's check from a bank. I will ship when the check clears.
Super Moderator
Joined: Mar 2007
Posts: 8,666
Likes: 0
From: Manor, TX (Outside of Austin)
Ads are free here, but there are a few rules/regs we ask our members, and staff to live by.
Please see the following threads for the details.
https://www.mazdaforum.com/forum/pri...posting-14548/
https://www.mazdaforum.com/forum/pri...ok-here-21001/
Your thread will be edited for content now as needed, and deleted completely when the 24 hrs is up... starting now.
Thread Starter
|
Junior Member
Joined: Aug 2014
Posts: 12
Likes: 0
From: Johnstown, PA
So what criteria am I not fulfilling? I looked at the post requirements... I'm not sure how many posts I did, but is that the issue? I noticed that I don't have a sign promoting the website. Am I going to have to retake the pictures? Anything specific?
Last edited by Maniac; Dec 21, 2014 at 08:15 PM.
Sold
Thread
Thread Starter
Forum
Replies
Last Post