I have an 07' Mazda6 four door and was wondering if I would be able to swap out the rear bumper cover with an 07' MazdaSpeed6 with light modifications to the back end? I went to a dealership and the guy I talked to made it sound like it was possible at first, but as the conversation carried on it seemed like he got dumber and that it wouldn't be possible. Please help!

 

No back end mods needed, what are required are the hood, bumper, the foam that goes behind it, the fenders, and fender liners. Things do not line up without all these parts. Good luck, and happy modding!

-Cameron Keffer

 

Thank you so much! One more question, will I be able to use my current hardware to attach all the speed6 parts?

 

Yes, things should just bolt right up. The only parts required are those that i named.

 

to do a speed 6 front conversion, u also need the radiator support because the holes are different around the grill area

 

Thanks ny but I'm actually looking into getting the front bumper from the '03 Mazda6. I'm wondering if that will actually just bolt right up or if I'm going to need to buy some other parts to bolt it up. Anyone who has any information on that I would appreciate the feedback.

 

...again please upload photos once it's done