Are There Any Performence Chips For The Mazda 3 ?
at least no one is giving him the run around!
there is no chip for the 3 yet. depending on what you want you can run a full standalone which ranges from $700-1300+, but that is usually out of most people range. if you are just trying to squeeze a bit more out of your 3, there's no options yet. there is a free mod you can do to advance timing a bit which makes it feel a bit more lively, but we're talking 2-4hp.
there is no chip for the 3 yet. depending on what you want you can run a full standalone which ranges from $700-1300+, but that is usually out of most people range. if you are just trying to squeeze a bit more out of your 3, there's no options yet. there is a free mod you can do to advance timing a bit which makes it feel a bit more lively, but we're talking 2-4hp.
A free mod adding 2-4hp...I must know quick haha. Which mod would that be MrTea?
ORIGINAL: MrTea
at least no one is giving him the run around!
there is no chip for the 3 yet. depending on what you want you can run a full standalone which ranges from $700-1300+, but that is usually out of most people range. if you are just trying to squeeze a bit more out of your 3, there's no options yet. there is a free mod you can do to advance timing a bit which makes it feel a bit more lively, but we're talking 2-4hp.
at least no one is giving him the run around!
there is no chip for the 3 yet. depending on what you want you can run a full standalone which ranges from $700-1300+, but that is usually out of most people range. if you are just trying to squeeze a bit more out of your 3, there's no options yet. there is a free mod you can do to advance timing a bit which makes it feel a bit more lively, but we're talking 2-4hp.
you can advance timing a bit (roughly 4*) by moving the crank sensor. takes about 10-15 minutes to do, and no complaints yet, only praises. just gotta pull off the passenger wheel and liner for access, loosen 2 bolts, move the sensor and you are done. you can check out mazda3forums for more info.
ORIGINAL: MrTea
you can advance timing a bit (roughly 4*) by moving the crank sensor. takes about 10-15 minutes to do, and no complaints yet, only praises. just gotta pull off the passenger wheel and liner for access, loosen 2 bolts, move the sensor and you are done. you can check out mazda3forums for more info.
you can advance timing a bit (roughly 4*) by moving the crank sensor. takes about 10-15 minutes to do, and no complaints yet, only praises. just gotta pull off the passenger wheel and liner for access, loosen 2 bolts, move the sensor and you are done. you can check out mazda3forums for more info.
Thanks.


