SP23 Remote start install. PLEASE HELP!!!
 

Hi, I want to install an aftermarket remote start in my Mazda 3 SP23, but don't know where to start. The car has a security system so I have to bypass that, I guess as well as the immobilizer system. Any ideas or help???

RE: SP23 Remote start install. PLEASE HELP!!!
 

If you want to save yourself a lot of trouble, use the Mazda factory part. It's made for your car, and guaranteed to work and wire up properly. I have it on sale dirt cheap $225. Only 'til end of month. This will work seamlessly with your factory immobilizer and security system.

here's a link to order: http://tinyurl.com/2zcol6

If you want to review the install instructions, send me an email, and I'll send them back to you. jowen@nelsonmazda.com. that way you'll know what you are getting into.

RE: SP23 Remote start install. PLEASE HELP!!!
 

Good advice, if you'd ask me.
Modern cars and all their electronics can be difficult to reconcile w/after-market (AM) electronics.I have no interest in a remote start kit (plus I own a 5-sp) but have read about many that have installed AM starter kits and had at least one issue with them each.

Does your car have the man-u-matic? Remote start kits won't work on the MTX cars, though they could probablybe made to by bypassing the clutch-in override switch, which is of course not recommended.

In this case, and if you can, stay with the factory recognized part/kit. You'll be a happier camper and sleep better @ night for it, I'm sure.

RE: SP23 Remote start install. PLEASE HELP!!!
 

Eric,
Just to show you how goodZoomzones price is, chweck this eBay auction out for the same OE kit.
http://cgi.ebay.com/ebaymotors/NIB-G...mZ270204231574

RE: SP23 Remote start install. PLEASE HELP!!!
 

i already got the remote start installed. i went ahead with the mazda remote start for the SP23.

thanks anyways