What ho one and all.

Wanting to fit a reversing camera to my Maz3 / gen 3 BM hatchback. The photo shows the camera I bought and it certainly plugs n plays. But the camera angle is too narrow to be of much use so have bought a fisheye camera. The photo harness has the two tails (6v and video), which the fisheye camera has the video socket but require 12v from the reversing light. Additionally, I beleive the MZD montiro will not disply AHD, but the fisheye camera does have the cable to cut to change from AHD to CVBS. However, nothing shows on the screen.
Perhaps the screen is not getting a signal as I have not connected the trigger wires that come with the fisheye camera cable.

But to what do I connect?



This is the camera / harness I bought, installed and everything works but I don't like the narrow camera angle. With these two (6v and video sockets) there must be a trigger wire; where would I attached the fisheye camera trigger wire; must be something on the harness, but what?

Grateful for your suggestions before I return the camera.

Thanks

 

I'm pretty bloody useless with everything auto and this was easy enough to follow that even I cruised through.






192.168.100.1 192.168.1.1