Mazda 3 Interior Lighting
Thread Starter
Joined: Mar 2008
Posts: 65
Likes: 0
From:
Mazda 3 Interior Lighting
I'm not sure if you guys noticed, but when i drop my girl off from a date she is always looking for the "unlock" button for the door. Is there anyway to change the lighting or add lighting to the buttons?
If you've done anything like this please let me know.
If you've done anything like this please let me know.
Senior Member
Joined: Dec 2004
Posts: 960
Likes: 0
RE: Mazda 3 Interior Lighting
be a gentleman and at least unlock the door for her...or you open the door for her and walk her to her door. hahha
i dont think there is a way to light up the auto-lock controls. maybe you could rig something up though.
i dont think there is a way to light up the auto-lock controls. maybe you could rig something up though.
Joined: Jun 2007
Posts: 1,129
Likes: 0
From:
RE: Mazda 3 Interior Lighting
ORIGINAL: Lupae3s
be a gentleman and at least unlock the door for her...or you open the door for her and walk her to her door. hahha
i dont think there is a way to light up the auto-lock controls. maybe you could rig something up though.
be a gentleman and at least unlock the door for her...or you open the door for her and walk her to her door. hahha
i dont think there is a way to light up the auto-lock controls. maybe you could rig something up though.
Super Moderator
Joined: May 2006
Posts: 1,526
Likes: 0
From:
RE: Mazda 3 Interior Lighting
This is from corwest on mazda3forums. See THIS thread for details.
As for the unlock button I can tell you one of the ideas that came up in that thread. Drill a hole in the button and then fill the hole with clear acrylic, getting it as flush with the face of the button as you can. Install a red LED behind the acrylic so that the acrylic glows when the LED is lit. Wire the LED up to a switched 12v power source that's hot with the ignition.
As for the unlock button I can tell you one of the ideas that came up in that thread. Drill a hole in the button and then fill the hole with clear acrylic, getting it as flush with the face of the button as you can. Install a red LED behind the acrylic so that the acrylic glows when the LED is lit. Wire the LED up to a switched 12v power source that's hot with the ignition.
Joined: Feb 2007
Posts: 551
Likes: 0
From:
RE: Mazda 3 Interior Lighting
A related question. Directly above each of the 3 gauges, there is atiny singlewhite light that comes on when you first enter the car (along with the dome light). Butitturns offimmediately when you start the car (along with the dome light). Any way to keep them on?
They would be nice to be able to have on during daylight, they throw an extra little bit of light on the white background gauges I have on my 3, which frankly can get a little hard to see at dusk (just before the blue kicks in) or on a very cloudy day.
They would be nice to be able to have on during daylight, they throw an extra little bit of light on the white background gauges I have on my 3, which frankly can get a little hard to see at dusk (just before the blue kicks in) or on a very cloudy day.
Super Moderator
Joined: Mar 2007
Posts: 8,666
Likes: 0
From: Manor, TX (Outside of Austin)
RE: Mazda 3 Interior Lighting
On the S models it's a blue light and it comes on as you describe, but also w/the parking/headlights/gauge background.
I don't know of a way to do that, but to get in there and connect them to a switched source. But then you'd probably lose them as a welcome light though too?
Dunno, Uber.
