I Went to an event where I temporarily lost my keys. in the mean time I removed the Tumbler and tried to crank it over..nothing happen.. then I realized this car has an immobilizing system therefore this wasn't gonna work.. while pulling the Tumbler out I had VERY LITTLE light, i popped off the Key reading ring and the spindled wire came unraveled.. so i found my keys the next morning. so i soldered some BARE speaker wire into a loop like there would have been if it would have not unraveled..(KEY Transponder COIL) and tried holding my key up to it and hoping it would start... still nothing.... im wondering if i may have shorted a wire or so in the clip that clips to the immobilizing ring (KEY TRANS COIL) if so i need to have it replaced where would i start? would it be where the wires ran to From the Coil Clip? if im making this hard to understand let me know.