fix your own tcm - mazda 3 2011 - some soldering, maybe
Thread Starter
|
Junior Member
Joined: Nov 2024
Posts: 1
Likes: 0
From: tor
fix your own tcm - mazda 3 2011 - some soldering, maybe
i bought a refurbed tcm for a 2011 mazda 3 2.0l engine as the existing one was giving the classic symptoms of a bad tcm, at and traction light on,
that was in may 2022 and now the refurbed one is acting up.
i did not give back my old one as they requested because they were only giving back a few dollars, but i resoldered / reflowed specific areas of the tcm circuit board sometime ago and now i can test to see if i did actually fix it.
more to the story in this video as you will see especially with the now bad refurbed tcm
that was in may 2022 and now the refurbed one is acting up.
i did not give back my old one as they requested because they were only giving back a few dollars, but i resoldered / reflowed specific areas of the tcm circuit board sometime ago and now i can test to see if i did actually fix it.
more to the story in this video as you will see especially with the now bad refurbed tcm
Thread
Thread Starter
Forum
Replies
Last Post