Hello everyone

My name is Tom and I live in Mexico
I have a Mazda 2 2013 1,5 liter with a cracked head
I gave it to a mechanic to repair but here in Mexico not all mechanics are mechanics
He didn't even have a torque wrench to refasten the head bolts
He continuously asked for more money and the parts he quoted were way too expensive
(guess its their way of making money)
I called everything off and had the disassembled car brought home. he threw all the parts and two boxes of screws in the trunk
I've been working on cars for 40 years and a head replacement isn't rocket science .

I have all the parts I need ...replacement head, oil, coolant, gaskets, timing chain set etc..

My Problem is that i cant identify all the screws in their proper place before starting the replacement
a lot of them are obvious and i have them separated from the rest
I don't want to go through the process of continuously changing screws due to length.

Does anyone have a diagram of the screws for a head replacement ??

Would appreciate it sooooo much

 

No Affiliation.
Maybe put your VIN Number in:
https://partsouq.com/

########
Else if your VIN is not Recognised Just Drill Down by Selecting
a) Mazda,
b) Mazda 2,
c) DE 2010_10 or whatever yours is
& then you should get enough to get the parts identified.

https://partsouq.com/en/catalog/genu...=1933184663&q=

1010A: CYLINDER HEAD & COVER
https://partsouq.com/en/catalog/genu...0&uid=76767&q=

1030A: CYLINDER BLOCK
https://partsouq.com/en/catalog/genu...0&uid=76768&q=

1040A: OIL PAN & TIMING COVER
https://partsouq.com/en/catalog/genu...0&uid=76769&q=

#########
For the Torque Settings etc that you will need, you will have to "Buy a Workshop Manual" nominal $20 as a CD or USB:
No Affiliation FleaBay MAZDA2 DE SERIES 1 & 2 2008-2014 WORKSHOP SERVICE REPAIR MANUAL IN DISC #321424242792 or similar

Rob

 

Thank you so much , great help

 

That is what This Forum is all about.

Rob