2011 Tribute 3.0L V6 cooling issue?
Thread Starter
|
Junior Member
Joined: Sep 2020
Posts: 1
Likes: 0
From: Toronto
2011 Tribute 3.0L V6 cooling issue?
Hi guys,
I just bought a 2011 Mazda Tribute (3.0L v6) and I love it, low millage and runs very smooth BUT
after I start the engine once is getting warm the radiator fan goes in full speed and stays like that till I turn the engine off, also I noticed that the thermostat is not opening (upper hose is hot, the lower one is cold) ... I replaced the thermostat twice (1st after market and the 2ns one OEM from a Mazda dealer) ... still the same issue, does anyone knows what can cause this issue?
Thanks!
Mike
I just bought a 2011 Mazda Tribute (3.0L v6) and I love it, low millage and runs very smooth BUT
after I start the engine once is getting warm the radiator fan goes in full speed and stays like that till I turn the engine off, also I noticed that the thermostat is not opening (upper hose is hot, the lower one is cold) ... I replaced the thermostat twice (1st after market and the 2ns one OEM from a Mazda dealer) ... still the same issue, does anyone knows what can cause this issue?Thanks!
Mike
Super Moderator
Joined: May 2012
Posts: 7,848
Likes: 32
From: Queensland Australia
Find someone with a scan tool that can read live data, monitor ECT info, maybe more than 1 data feed & fan output mode data.
May have a faulty temp sensor or fan control relay/module.
May have a faulty temp sensor or fan control relay/module.
Thread
Thread Starter
Forum
Replies
Last Post
David N
Mazda2
1
Jul 4, 2018 06:20 AM