Mazda Protege This compact model offers an economical solution for the need for a sporty sedan or wagon.

Door panels

Old Jul 22, 2006 | 04:13 PM
  #1  
Dakness's Avatar
Thread Starter
Joined: Jul 2006
Posts: 1
Likes: 0
Default Door panels

Sorry if this has already been covered. I was wondering if anyone could tell me how to remove the door panels on a '03 protege or give me a link to a good DIY.
Thank you
 
Reply
Old Jul 24, 2006 | 10:58 PM
  #2  
babyhuey's Avatar
Senior Member
Joined: Jul 2005
Posts: 2,747
Likes: 0
Default RE: Door panels

See if this will help. Could not find any pics but this is out of shop manual.





[IMG]local://upfiles/1377/6C9413360382420FAB8038251C0BCF02.gif[/IMG]
FRONT DOOR TRIM REMOVAL/INSTALLATION
1. Remove the inner garnish.
2. Remove the regulator handle if equipped.
3. Remove screws A and the fastener.
4. Slide the pull handle cover toward the front of the vehicle, then disengage tab B from the front door trim.
5. Remove the screws C.
6. Disengage clips D using a fastener remover from the body.
7. Pull the front door trim upward, then disengage pins E from the body.
8. Extract the inner handle from the front door trim.
9. Disconnect the power window main switch connector (driver’s side).
10. Disconnect the power window sub switch connector (passenger’s side).

REAR DOORS
[IMG]local://upfiles/1377/89C05BBA75174313BB68E26AD5BFA0E3.gif[/IMG]
2. Remove the regulator handle if equipped.
3. Insert a tape-wrapped fastener remover under the pull-handle cover, and disengage tab A.
[IMG]local://upfiles/1377/34B47F83F6BF40D29D4EE043CD726C02.gif[/IMG]
4. Insert a tape-wrapped flathead screwdriver into the access hole under the forward pull-handle cover, and remove the pull-handle cover by pulling it upward and diagonally while pushing clip B.
[IMG]local://upfiles/1377/820918AFE9A7469D97D081A370312E8C.gif[/IMG]
5. Remove the screws and fasteners.
6. Disengage clips C using a fastener remover.
7. Pull the rear door trim upward, then disengage pins D from the body.
8. Disconnect the power window sub switch connector if equipped.
9. Remove the inner handle from the rear door trim.
10. Install in the reverse order of removal.
 
Reply
Old Jul 25, 2006 | 01:09 AM
  #3  
bkey71's Avatar
Senior Member
Joined: Sep 2005
Posts: 1,446
Likes: 0
Default RE: Door panels

babyhuey comes through again with a great explanation!
 
Reply
Old Aug 1, 2006 | 05:57 AM
  #4  
ljmcneely's Avatar
Joined: Aug 2006
Posts: 2
Likes: 0
From:
Default RE: Door panels

Hey bkey, it's your ol' friend in California. Thought I'd come over here and share my Mazda expertise[8D]
See ya when I gets back to Texas!
 
Reply
Old Jun 17, 2007 | 11:02 AM
  #5  
RandyK's Avatar
Joined: Oct 2006
Posts: 3
Likes: 0
Default RE: Door panels

my rear power lock is stuck, this is great info babyhuey.will give it a swirl next weekend
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
the_gray_mazda6
Mazda6
3
Apr 21, 2009 01:32 AM
mtrain
Mazda BT 50 & Pickup Trucks
7
Dec 10, 2007 09:31 PM
arrow9815
Mazda Protege
2
Sep 29, 2007 07:33 PM
mrcx9
Mazda CX-9
1
Jul 12, 2007 12:07 PM
MikeMan
Mazda3
7
Feb 15, 2006 09:02 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:48 PM.