Mazda Millenia This sedan, the flagship luxury sedan, offers both a naturally aspirated and supercharged model, so you can have your luxury, and, if you have a need for speed, big horsepower.

Shift Solenoid problem 98 Millenia S

Old May 29, 2007 | 01:15 PM
  #1  
jav773's Avatar
Thread Starter
Joined: May 2007
Posts: 7
Likes: 0
Default Shift Solenoid problem 98 Millenia S

Hi guys,

I just purchased a 1998 Millenia S (2.3L Supercharged, Automatic Transmission). The problem with the car is that it won't shift from 2nd gear to 3rd gear all the time. The rpm's won't go back down. I have a diagnostic machine and these are the error codes.

P0755 -Shift Solenoid B
P0431 Warm up Catalyst below Threshold Bank 2
P0421 Bank 1

Any recommendations would be greatly appreciated.

Thanks,
John
 
Reply
Old May 29, 2007 | 03:35 PM
  #2  
keninn's Avatar
Senior Member
Joined: Sep 2005
Posts: 983
Likes: 0
From:
Default RE: Shift Solenoid problem 98 Millenia S

when was the last time, if ever, that the transmission fluid was serviced? i would start there, and add some lubegard. cause if the solenoid is bad, that sucker is in the valve body.

0421/31 is your pre cats. also fairly big bucks, and a fair amount of labor. both cats will cost you about 800 with tt&l. then, there are a bunch of gaskets, too.
 
Reply
Old May 31, 2007 | 02:34 PM
  #3  
jav773's Avatar
Thread Starter
Joined: May 2007
Posts: 7
Likes: 0
Default RE: Shift Solenoid problem 98 Millenia S

I'm guessing over $1000. Is that the case? If it is then I'm get rid of this junk.
 
Reply
Old May 31, 2007 | 07:33 PM
  #4  
keninn's Avatar
Senior Member
Joined: Sep 2005
Posts: 983
Likes: 0
From:
Default RE: Shift Solenoid problem 98 Millenia S

well, back to the first question. when was the last time the fluid was changed? if you dont know, pull out the dipstick, and look/smell it. if it is dark, and smells burned, i would first try a couple of fluid changes, or find a shop with a flush machine and have it done. you have to find out if the cats are really bad, or if the post oxygen sensors are wacky. it is a common problem for the sensors to be too sensitive. some people use spark plug anti foulers in between, and they will make the post cat sensor less sensitive, so it wont throw the ce lite. the cats wont go bad unless they are contaminated, and that is hard to diagnose. there is also at least 1 other inexpensive fix, but it aint legal. go to ebay and look up oxygen sensor.
 
Reply
Old Jun 5, 2007 | 07:18 PM
  #5  
2000smazda's Avatar
Senior Member
Joined: Jun 2006
Posts: 112
Likes: 0
From: Washington Ch Ohio
Default RE: Shift Solenoid problem 98 Millenia S

Yes,the inexpensive way works great!
 
Reply
Old Jun 6, 2007 | 11:40 PM
  #6  
jav773's Avatar
Thread Starter
Joined: May 2007
Posts: 7
Likes: 0
Default RE: Shift Solenoid problem 98 Millenia S

The fluid hasn't been changed for a while, so I'll try that first. Thanks for the suggestions so far.
 
Reply
Old Jun 14, 2007 | 04:00 PM
  #7  
jav773's Avatar
Thread Starter
Joined: May 2007
Posts: 7
Likes: 0
Default RE: Shift Solenoid problem 98 Millenia S

Did the Transflush with the Duralube and it's working better, but not perfectly. I like the car alot though. It has a beautiful ride. Much more relaxing than my 425hp Stang. Is it possible to do a pulley swap and add more hp?
 
Reply
Old Jun 14, 2007 | 06:11 PM
  #8  
keninn's Avatar
Senior Member
Joined: Sep 2005
Posts: 983
Likes: 0
From:
Default RE: Shift Solenoid problem 98 Millenia S

dunno anything about duralube. looks like lights and mirrors to me. lubegard works. several car manufacturers specify it as an additive to their transmissions. i have been using it for years. it's your money.
 
Reply
Old Jun 15, 2007 | 10:08 AM
  #9  
jav773's Avatar
Thread Starter
Joined: May 2007
Posts: 7
Likes: 0
Default RE: Shift Solenoid problem 98 Millenia S

Well excuuse me. I said the wrong name. I used Lubegard and so far it's helped.
 
Reply
Old May 22, 2010 | 03:41 PM
  #10  
Timinator20's Avatar
Junior Member
Joined: May 2010
Posts: 1
Likes: 0
Default

I am having trouble.
I got the CE light to come on and checked the code to find that the Shift solenoid B for my '98 Millenia S was having an error. I have the new solenoid, but it looks much different than the others. Anyone have a diagram or possibly the knowledge to tell me which solenoid is which?
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:09 AM.