Hi all
WOW!!!!??? help please? But first it's a car I'd love to own for a while. Second I don't know what it drives like when up and running?
Thirdly I'll be working with the devil that I'll know before long.
Lastly now. I'm working on it and found that I need the unbolting sequence to unbolt the head so's not to distort it too much. Also need the tightening sequence and torque settings for the head bolts.

I looked up this forum to find the workshop manual. Every time I clicked the link it gave me 404 error try later or file changed or has moved. I really need a workshop manual. Can someone help me with this.

Like I wrote WOW what a devil.
'O'and BTW i'm a newbie

 

ebay. and dont get a chiltons.

if our millenias needed headwork, i would either junk the car, or buy a jdm engine.

 

Hi keninn, I was looking for a free on line manual.
I'm as stubborne as they come and have time on my hands.
I have half the motor apart and about to unbolt the head. can you or someone post unboltening sequence if there is one and the tourque settings with the tightening headbolt sequence please.
thanks

 

go to the other site, mazdaworld.org. you will have to register. then go to the millenia section, and look for yel-low. he is building a 2.5 right now, and has built several