Mazda CX-5 The CX-5 CUV debuts Mazda's SKYACTIV® TECHNOLOGY and is unique for its impressive fuel economy, responsive handling and bold style

Passenger Seat Electric Adjuster Switch Removal

Old Dec 28, 2024 | 09:53 PM
  #1  
Jonesy5960's Avatar
Thread Starter
|
Junior Member
Joined: Dec 2024
Posts: 1
Likes: 0
From: Illinois
Default Passenger Seat Electric Adjuster Switch Removal

I purchased a new passenger side seat cover trim for the wife's 2019 CX5. It requires the removal of the plastic side panel. Is anyone familiar with the process if removing the adjustment levers beforehand? I was looking at a Mazda service diagram that's less than clear and I'd rather not guess and break something by forcing one off and breaking the lever or the switch itself. Below is the document I'm referencing. TIA.

https://www.mcx5.org/front_seat_side_cover_removal_installation-765.html
 
Reply
Old Dec 31, 2024 | 03:09 AM
  #2  
Leszczynski's Avatar
Junior Member
Joined: Jun 2024
Posts: 10
Likes: 0
From: Poland
Default

Removing the passenger side seat panel on a 2019 Mazda CX-5 requires careful handling of the adjustment levers to avoid damage. Start by identifying whether the levers are secured with screws or clips, as these are the two most common methods. If screws are present, they’ll usually be hidden behind small caps that can be gently pried off with a trim removal tool or a flathead screwdriver wrapped in tape to prevent scratches. For clip-secured levers, use a trim tool to apply even pressure around the base, avoiding twisting motions that could break the plastic. Once the levers are removed, detach the side panel by locating and removing any visible screws and gently prying loose the hidden clips along the edges. If the panel houses seat adjustment switches, disconnect the wiring harness before fully removing it. Referring to a Mazda service diagram can help pinpoint the fastener locations, even if the details seem unclear at first glance.
 
Reply
Old Dec 31, 2024 | 07:36 AM
  #3  
Lobstah's Avatar
Senior Member
Joined: Apr 2021
Posts: 1,863
Likes: 30
From: Maine
Default

Personally, I would get a price on having a dealer do it before attempting.
The seat hardware is very expensive and easily damaged.
DIY means you probably don't have the funds to replace any parts that you might break.
 
Reply
Old Dec 31, 2024 | 10:38 PM
  #4  
schmieg's Avatar
Senior Member
Joined: Oct 2015
Posts: 705
Likes: 9
From: Madeira, Ohio
Default

Originally Posted by Lobstah
Personally, I would get a price on having a dealer do it before attempting.
The seat hardware is very expensive and easily damaged.
DIY means you probably don't have the funds to replace any parts that you might break.
Back in the day when I could still work on my cars, some of the reason was I enjoyed it, but a lot was that, even though I could afford to have it done, I'm a cheap bastard.
 
Reply
Old Jan 1, 2025 | 08:53 AM
  #5  
Lobstah's Avatar
Senior Member
Joined: Apr 2021
Posts: 1,863
Likes: 30
From: Maine
Default

Originally Posted by schmieg
Back in the day when I could still work on my cars, some of the reason was I enjoyed it, but a lot was that, even though I could afford to have it done, I'm a cheap bastard.
You nailed it.
That's why I also learned to work on motorcycles, boats, snowmobiles and also learned welding, plumbing, electrical, HVAC, computer repair.
However, I did know enough to draw the line on certain things that would've cost me more if I screwed it up
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BookGirlNJ
Mazda CX-5
5
Jun 15, 2022 11:49 AM
Taz
Mazda CX-5
1
Jul 8, 2020 05:37 PM
brett1
Mazda5
1
Nov 24, 2012 11:32 AM
13CX5STL
Mazda CX-5
3
Sep 20, 2012 07:56 PM
91MPVoo7
Mazda MPV
0
Mar 15, 2008 03:10 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:16 PM.