2013 CX-5 Japanese cluster change

Reply Subscribe

Jan 29, 2023 | 01:14 PM

arifshaw

Thread Starter

Junior Member

Joined: Jan 2023

Posts: 2

Likes: 0

From: Guyana

2013 CX-5 Japanese cluster change

2013 CX-5 JDM CLUSTER anyone had luck with a software to flash the cluster IC?

Feb 18, 2023 | 08:57 PM

arifshaw

Thread Starter

Junior Member

Joined: Jan 2023

Posts: 2

Likes: 0

From: Guyana

tried some odb2 software

And finally nothing works ...its like the language cluster firmware is hardwired to the unit by a chip

Feb 19, 2023 | 09:39 AM

Lobstah

Senior Member

Joined: Apr 2021

Posts: 1,860

Likes: 30

From: Maine

If configuration is not performed when the instrument cluster is replaced with a new one, the vehicle specification information is not stored in the instrument cluster and the system will not operate normally.
When performing configuration, it is necessary to read the vehicle specification information from the instrument cluster before replacing it. Connect the M-MDS to the vehicle and perform vehicle identification before removing the instrument cluster. The vehicle specification information is temporarily stored in the M-MDS.