BT-50 2014 3.2l Fuel Rail pressure sensor error code P0191
Thread Starter
|
Junior Member
Joined: Jan 2024
Posts: 1
Likes: 0
From: Kareedouw
BT-50 2014 3.2l Fuel Rail pressure sensor error code P0191
Hi Guys
My BT-50 went into limp mode and the traction control light came on..(not flashing, permantely on). I got a error code of P0191. I also cleanend my ABS sensors as advised by many people. Still i go into limp mode. The only strange thing is it only happens on the same place as i return home. I live on a farm and have to travel through 2 passes. This only happens on the same 2 places where the incline is very steep. On a flat road no problem at all. Mazda said that I need to buy the rail and the sensor for a smal fortune....any ideas what could be the problem or suggestions would be appreciated
My BT-50 went into limp mode and the traction control light came on..(not flashing, permantely on). I got a error code of P0191. I also cleanend my ABS sensors as advised by many people. Still i go into limp mode. The only strange thing is it only happens on the same place as i return home. I live on a farm and have to travel through 2 passes. This only happens on the same 2 places where the incline is very steep. On a flat road no problem at all. Mazda said that I need to buy the rail and the sensor for a smal fortune....any ideas what could be the problem or suggestions would be appreciated
Thread
Thread Starter
Forum
Replies
Last Post
tribute06dude
Mazda Tribute
0
May 26, 2022 08:10 AM