Has anybody got any idea if the header that you can get for the b2200 will fit on a b2600? I fail to understand why they make one for the smaller motor and not the bigger one.
flyboy

 

what i would do, is find a company who makes a header for the smaller motor, say DC sports (not sure if they make one or not, just an example), and contact that company and ask them if it will fit....any decent sized company will know what engines/models their products fit...

 

I know pacesetter makes one for the 2.0 but not sure what else.

 

The B2600 and B2200 have completly different cylinder heads and the headers do not interchange. The headers made for the B2200 will fit the B2000. Since a lot of B2200s and B2600s have basically the same body if you really want a set and they are not made you could probably buy a set of B2200 headers, have a machine shop cut off the flange and custom make one for your head, then just weld it back onto the pipes. Chances are they would fit inside the rails and everything just fine. The only thing I'm really unsure of is I think the intake and exhaust are on opposite sides of the engine compartment on the B2600. The B2200 has the exhaust manifold on the driver side....

 

The Pacesetter header for the B2600 will fit, don't pay attention to the "2WD ONLY" junk. I have a 4x4 and it fit mine.