Mazda Premacy sport 2ltr weak mixture fault code
#1
05-31-2016, 05:25 PM
Mazda Premacy sport 2ltr weak mixture fault code
ve A Mazda premacy sport 2004.
The problem I have is that, the car initially struggled to start, it had lost approx £20 within a three days.. Turned out the injector valve seals were worn in 2 injectors hence I had these replaced. Car was initially fine,
Now the car starts fine, there is no loss of power however there is a putt putt sound coming from car, almost as if it was struggling to breath. There is a slight judder to the engine and the gear stick visibly vibrates . There is also a fair bit of smoke from the exhaust. Engine management light is also on, had the fault read by a friend and the code p1014.
Any ideas as to what could be going on with this car?
The problem I have is that, the car initially struggled to start, it had lost approx £20 within a three days.. Turned out the injector valve seals were worn in 2 injectors hence I had these replaced. Car was initially fine,
Now the car starts fine, there is no loss of power however there is a putt putt sound coming from car, almost as if it was struggling to breath. There is a slight judder to the engine and the gear stick visibly vibrates . There is also a fair bit of smoke from the exhaust. Engine management light is also on, had the fault read by a friend and the code p1014.
Any ideas as to what could be going on with this car?
Thread
Thread Starter
Forum
Replies
Last Post
