88 323 gtx
 

project is an 88 GTX had some rust, so I cut it up. I am going to make an awesome exo car, 1.6L AWD turbo for those who don't know the car. I am doing the rotor upgrade, to move it from behind to outside of the hub.

does anyone else have some knowledge of common and fun mods ton do? I wana hear your thoughts.

Howdy, welcome .

Welcome to the forum. Sounds like a great project. Any pictures to share?

https://cimg8.ibsrv.net/gimg/www.maz...45a611ba9f.jpg
before the project started
https://cimg5.ibsrv.net/gimg/www.maz...0b58433653.jpg
heart pulled
https://cimg9.ibsrv.net/gimg/www.maz...d5e9851718.jpg
tear down and rebuilt
https://cimg0.ibsrv.net/gimg/www.maz...25dfe12ca5.jpg
https://cimg3.ibsrv.net/gimg/www.maz...a12a09512c.jpg
powder coated factory turbo
https://cimg5.ibsrv.net/gimg/www.maz...992db6b522.jpg
matched the valve cover
https://cimg5.ibsrv.net/gimg/www.maz...48a623181f.jpg
RZR seat mod
https://cimg2.ibsrv.net/gimg/www.maz...007a2c224f.jpg
power steering delete
https://cimg5.ibsrv.net/gimg/www.maz...ebe7d2b4bc.jpg
https://cimg0.ibsrv.net/gimg/www.maz...e16b3aef8a.jpg
brake upgrade on the fronts
https://cimg3.ibsrv.net/gimg/www.maz...c0dcdf4c0a.jpg
https://cimg6.ibsrv.net/gimg/www.maz...5c627e155a.jpg
ford escort calipers and 1988/89 front rotors

i am trying to find a rotor that will work similar to the front for the rear. looking for a 9.8" diameter and a center bore of 60mm that i can install on the outside of the hub on the rear.
the galants from 89 have a very close setup for the reas but they are over 10" diameter.

anyone else succesfully modify their rear brake setup?