So i just got in my HIDs for my 06 mazda 6s.Iordered Apexcone Premium HID Kitand i am really confused on how to install it. So i imagine i have to take the bumper off to get to where the bulb is. I am lost from there. Where do you put the ballist? Where do all the wire connect to? Anybody here have full instuctions with picture or anybody can walk me through it. Thanks

 

Didn't come with instructions?

 

Yes it did but the constructions are very confusing and not very detailed. I would just like to make sure im doing everything right.

 

I took the bumper off part way and it was such a pain. I recommend taking it off. As for the ballasts, mount it wherever you can find a spot, but I think I recall the instructions saying not near a heat source or something like that. Try mounting it under or on the airbox, if you still have the stock. And for passenger side, uh someone mentioned something about under ABS or something like that. Anyways, here is a write-up, http://forum.mazda6club.com/index.ph...3330&st=45 , it's on page 4.

Edit: You don't need to take the headlight out of the car like the write up says. And in the write up, it tells you where the guy mounted his ballasts.